Liste des publications du département MPI

Articles dans des revues Internationales avec Comité de Lecture répertorié

  • [AICL1] Duplessis Kergomard Y., Dau F., Iordanoff I., Implementation of a Discrete Element Method for the space-time modeling of loading in the caseof a soft shock: qualitative approach. International Journal of Computations and Modelling, Vol. 1, No. 2, pp. 39-72, 2011.
  • [AICL2] Palin-Luc T., Coupard D., Dumas C., Bristiel P., Simulation of multiaxial fatigue strength of steel component treated by surface induction hardening and comparison with experimental results. International Journal of Fatigue, Vol. 33, pp. 1040-1047, DOI 10.1016/j.ijfatigue.2011.02.004, 2011.
  • [AICL3] Albert G., Laheurte R., K'Nevez J.Y., Darnis P., Cahuc O., Experimental milling moment model in orthogonal cutting condition: to an accurate energy balance. The International Journal of Advanced Manufacturing Technology, Vol. 55, No. 9-12, pp. 843-854, DOI 10.1007/s00170-010-3118-0, 2011.
  • [AICL4] K'Nevez J.Y., Cahuc O., Darnis P., Laheurte R., Mathematical cutting model based on experimental approach: Drilling application. Ed. Trans Tech Publications, Switzerland, Applied Mechanics and Materials, Vol. 62, pp. 77-84, DOI 10.4028/www.scientific.net/AMM.62.77, 2011.
  • [AICL5] Zapciu M., K'Nevez J.Y., Laheurte R., Darnis P., Dynamic Characterization and Predictive Maintenance Concept of Machine Tool Spindle. Ed. Trans Tech Publications, Switzerland, Applied Mechanics and Materials, Vol. 62, pp. 147-154, DOI 10.4028/www.scientific.net/AMM.62.147, 2011.
  • [AICL6] Zapciu M., K'Nevez J.Y., Gérard A., Cahuc O., Bisu C.F., Dynamic characterization of machining systems. The International Journal of Advanced Manufacturing Technology, Vol. 57, No. 1, pp. 73-83, DOI 10.1007/s00170-011-3277-7, 2011.
  • [AICL7] Cahuc O., Gérard A., Bisu C.F., Ispas C., A force torsor analysis for a turning process in the presence of self-excited vibrations. Applied Mechanics and Materials, Vol. 62, pp. 135-146, DOI 10.4028/www.scientific.net/AMM.62.135, 2011.
  • [AICL8] Dumas C., Caro S., Cherif M., Garnier S., Furet B., Joint Stiffness Identification of Industrial Serial Robots. Ed. cambridge University Press, Robotica, Cambridge University Press, Vol. 30, No. 4, DOI dx.doi.org/10.1017/S0263574711000932, 2011.
  • [AICL9] Humbert M., Blaineau P., Germain L., Gey N., Refinement of orientation relations occurring in phase transformation based on considering only the orientations of the variants. Scripta Materialia, Vol. 64, No. 2, pp. 114-117, DOI 10.1016/j.scriptamat.2010.09.016, 2011.
  • [AICL10] Calamaz M., Coupard D., Nouari M., Girot F., Numerical analysis of chip formation and shear localisation processes in machining the Ti-6Al-4V titanium alloy. The International Journal of Advanced Manufacturing Technology, Vol. 52, No. 9-12, pp. 887-895, 2011.
  • [AICL11] Jacquin D., De Meester B., Simar A., Deloison D., Montheillet F., Desrayaud C., D. Jacquin, B. de Meester, A. Simar, D. Deloison, F. Montheillet, C. Desrayaud, A simple Eulerian thermomechanical modeling of friction stir welding, Journal of Materials Processing Technology, Volume 211, Issue 1, 1 January 2011, Pages 57-65, ISSN 0924-0136, 10.1016/j.jmatprotec.2010.08.016. (http://www.sciencedirect.com/science/article/pii/S092401361000258X) Keywords: Friction stir welding; Process model; Simple thermomechanical model. Journal of Materials Processing Technology, Vol. 211, No. 1, pp. 57 - 65, 2011.
  • [AICL12] Laheurte R., Darnis P., Darbois N., Cahuc O., Néauport J., Subsurface damage distribution characterization of ground surfaces using Abbott–Firestone curves. Optics Express, Vol. 20, No. 12, pp. 13551-13559, 2012.
  • [AICL13] Serboi C., Velicu S., Darnis P., Laheurte R., Ionescu C., The Preliminary Study Of Machinability During Milling Of Titanium Alloy (Ti-6Al-4V). Ed. Trans Tech Publications, Switzerland, Applied Mechanics and Materials, Vol. 186, pp. 200-207, DOI 10.4028/www.scientific.net/AMM.186.200, 2012.
  • [AICL14] Francescato P., Gillet A., Leh D., Saffré P., Comparison of optimal design methods for Type 3 high-pressure storage tanks. Ed. elsevier, Composite Structures, No. 94, pp. 2087-2096, DOI 10.1016/j.compstruct.2012.01.018 , 2012.
  • [AICL15] Cahuc O., Bisu C.F., Gérard A., Link between chips and cutting moments evolution. Journal Advanced Materials Research, Vol. 443, pp. 89-102, DOI 10.4028/www.scienfific.net/AMR.423.89, 2012.
  • [AICL16] Bisu C.F., Gérard A., Zapciu M., Cahuc O., The milling process monitoring using 3D envelope method. Journal Advanced Materials Research, No. 423, pp. 77-88, DOI 10.4028/www.scientific.net/AMR.423.77, 2012.
  • [AICL17] Royer R., Cahuc O., Gérard A., Strain gradient plasticity applied to material cutting. Journal Advanced Materials Research, Vol. 423, pp. 103-113, DOI 10.4028/www.scientific.net/AMR.423.103, 2012.
  • [AICL18] Bisu C.F., Zapciu M., Cahuc O., Gérard A., Anica M., Envelope dynamic analysis: a new approach for milling process. The International Journal of Advanced Manufacturing Technology, Vol. 62, No. 5-8, pp. 471-486, DOI 10.1007/s00170-011-3814-4, 2012.
  • [AICL19] Mehdizadeh R., Taillandier F., Breysse D., Niandou H., Methodology and tools for risk evaluation in construction projects using risk breakdown structure. European Journal of Environmental and Civil Engineering, Vol. 16, Supplément 1, pp. 78-98, DOI 10.1080/19648189.2012.681959, 2012.
  • [AICL20] André D., Iordanoff I., Charles J.L., Néauport J., Discrete element method to simulate continuous material by using the cohesive beam model. Ed. Elsivier, Computer Methods in Applied Mechanics and Engineering, Vol. 213-216, pp. 113-125, 2012.
  • [AICL21] Germain L., Gey N., ., Blaineau P., Humbert M., An advanced approach to reconstructing parent orientation maps in the case of approximate orientation relations: Application to steels. Acta Materialia, Vol. 60, No. 11, pp. 4551–4562, DOI 10.1016/j.actamat.2012.04.034, 2012.
  • [AICL22] Barthes M.L., Mantaux O., Pedros M., Lacoste E., Dumon M., Recycling of aged ABS from real WEEE through ABS/PC blends in the ABS-rich compositions. Advances in Polymer Technology, Vol. 31, No. 4, pp. 343–353, 2012.
  • [AICL23] Jallageas J., K'Nevez J.Y., Cherif M., Cahuc O., Modeling and optimization of vibration-assisted drilling on positive feed drilling unit. The International Journal of Advanced Manufacturing Technology, DOI 10.1007/s00170-012-4559-4, 2012.
  • [AICL24] Kargulewicz M., Iordanoff I., Marrero V., Tichy J., Modeling of magnetorheological fluids by the discrete element method. ASME Journal of Tribology, Vol. 134, No. 3, 2012.
  • [AICL25] Tirand G., Arvieu C., Lacoste E., Quenisset J.M., Control of aluminium laser welding conditions with the help of numerical modelling. Journal of Materials Processing Technology, Vol. 213, No. 3, pp. 337-348, 2013.
  • [AICL26] Jebahi M., Charles J.L., Dau F., Iloul L., Iordanoff I., 3D coupling approach between discrete and continuum models for dynamic simulations (DEM–CNEM). Computer Methods in Applied Mechanics and Engineering, Vol. 255, pp. 196-209, DOI dx.doi.org/10.1016/j.cma.2012.11.021, 2013.
  • [AICL27] Terreros I., Iordanoff I., Charles J.L., Simulation of continuum heat conduction using DEM domains. Computational Material Science, Vol. 69, pp. 46-52, DOI 10.1016/j.commatsci.2012.11.021, 2013.
  • [AICL28] Montoya M., Calamaz M., Géhin D., Girot F., Evaluation of the performance of coated and uncoated carbide tools in drilling thick CFRP/aluminium alloy stacks. The International Journal of Advanced Manufacturing Technology, DOI dx.doi.org/10.1007/s00170-013-4817-0, 2013. Sous presse.
  • [AICL29] Cahuc O., Bisu C.F., Gérard A., Darnis P., Laheurte R., Correlation between torsor measurements on the chip orientation. Journal Advanced Materials Research, Vol. 698, pp. 79-88, Trans Tech Publications, Switzerland, 2013.
  • [AICL30] Nouari M., Calamaz M., Haddag B., Girot F., Analysis of coating performances in machining titanium alloys for aerospace applications. Ed. Inderscience Enterprises Ltd, International Journal of Machining and Machinability of Materials, Vol. 13, pp. 158-173, DOI 10.1504/IJMMM.2013.053220, 2013.
  • [AICL31] Sanguinetti Ferreira R.A., Yadava Y.P., Quenisset J.M., Arvieu C., Matrix consolidation mechanism in 1D-Ti/SiC/C composites produced by continuous binder powder coating. Material Research-Ibero-American Journal of Materials, Vol. 6, No. 2, pp. 310-314, 2013.
  • [AICL32] Pateloup S., Chanal H., Duc E., Process parameter definition with respect to the behaviour of complex kinematic machine tools. The International Journal of Advanced Manufacturing Technology, DOI 10.1007/s00170-013-5118-3, 2013.
  • [AICL33] Jebahi M., André D., Dau F., Charles J.L., Iordanoff I., Simulation of Vickers indentation of silica glass. Journal of Non-Crystalline Solids, Vol. 378, No. 0, pp. 15 - 24, DOI dx.doi.org/10.1016/j.jnoncrysol.2013.06.007, ISSN 0022-3093, 2013.
  • [AICL34] Olteanu L., Laheurte R., Darnis P., Bisu C.F., Determining the Position of Cutting Tool in Drilling for Analysis of Mechanical Actions. Applied Mechanics and Materials, Vol. 325 - 326, pp. 1382-1386, DOI 10.4028/www.scientific.net/AMM.325-326.1382, 2013.
  • [AICL35] André D., Jebahi M., Iordanoff I., Charles J.L., Néauport J., Using the discrete element method to simulate brittle fracture in the indentation of a silica glass with a blunt indenter. Computer Methods in Applied Mechanics and Engineering, Vol. 256, No. 1, pp. 136-147, DOI 10.1016/j.cma.2013.06.008D, 2013.
  • [AICL36] Errotabehere X., Bois C., Dumon M., Le Houérou V., Gauthier C., Experimental and numerical analysis of the blistering of a polymeric coating during scratching process. Progress in Organic Coatings, 2013. Soumis pour publication.
  • [AICL37] Goupil A., Iordanoff I., Charles J.L., Rinchet A., Modelling of polishing tools for high spatial frequency defect correction on aspherical surfaces. Ed. Ricardo Alves de Sousa and Robertt Valente, Key Engineering Materials, Vol. 554-557, pp. 1232-1241, DOI 10.4028/www.scientific.net/KEM.554-557.1232, 2013.
  • [AICL38] Clouet B., Pommier R., Danis M., New composite timbers : full-field analysis of adhesive behaviour. The Journal of Strain Analysis for Engineering Design, Vol. 49, No. 3, pp. 155-160, DOI 10.1177/0309324713486894, 2013.
  • [AICL39] Salguero J., Batista M., Calamaz M., Girot F., Marcos M., Cutting Forces Parametric Model for the Dry High Speed Contour Milling of Aerospace Aluminium Alloys. Procedia Engineering, No. 63, pp. 735-742, DOI 10.1016/j.proeng.2013.08.215 , 2013.
  • [AICL40] Pichot F., Danis M., Lacoste E., Danis Y., Numerical definition of an equivalent GTAW heat source. Journal of Materials Processing Technology, Vol. 213, pp. 1241– 1248, 2013.
  • [AICL41] Tirand G., Arvieu C., Lacoste E., Quenisset J.M., Influence of post laser welding heat treatment on assembling performance of aluminum alloy structure. Metallurgical and Materials Transactions A, Vol. 44, No. 12, pp. 5577-5586, 2013.
  • [AICL42] Blaineau P., Laheurte R., Darnis P., Darbois N., Cahuc O., Néauport J., Relations between subsurface damage depth and surface roughness of grinded fused silica. Optics Express, Vol. 21, pp. 30433-30443, DOI dx.doi.org/10.1364/OE.21.030433, 2013.
  • [AICL43] Perry N., Pompidou S., Mantaux O., Information exchanges between experts for thermoset composites design for recycling. International Journal of Environment and Waste Management, Vol. 13, pp. 396-411, 2014.
  • [AICL44] Jallageas J., Cherif M., K'Nevez J.Y., Cahuc O., New Vibration system for advanced drilling composite-metallic stacks. SAE International Journal of Materials and Manufacturing, Vol. 7, No. 1, DOI 10.4271/2013-01-2078, 2014.
  • [AICL45] Hamzaoui F., Taillandier F., Mehdizadeh R., Breysse D., Allal A., Evolutive Risk Breakdown Structure for managing construction project risk. European Journal of Environmental and Civil Engineering, Accepté pour publication, 2014.
  • [AICL46] Pottier T., Germain G., Calamaz M., Morel A., Coupard D., Sub-Millimeter Measurement of Finite Strains at Cutting Tool Tip Vicinity. Experimental Mechanics, DOI 10.1007/s11340-014-9868-0, 2014. Sous presse.
  • [AICL47] Metoui S., Pruliere E., Ammar A., Dau F., Iordanoff I., The proper generalized decomposition for the simulation of delamination using cohesive zone model. International Journal for Numerical Methods in Engineering, Vol. 99, No. 13, pp. 1000-1022, 2014.

Articles dans des revues Nationales avec Comité de Lecture répertorié

  • [ANCL1] Cherif M., Bois C., Landon Y., Rôle des défauts de perçage sur le comportement en matage des composites stratifiés sous sollicitation de fatigue. Ed. LAVOISIER, Revue des Composites et des Matériaux Avancés, Vol. 24, No. 4, 2014.

Articles dans des revues avec Comité de Lecture Non répertorié dans les bases de données internationales

  • [ACLN1] Almansour E., Bonnet J.F., Heredia M., Potentiel de production de biogaz à partir de résidus agricoles ou de cultures dédiées en France. Sciences Eaux Territoires, No. 4, pp. 64-73, 2011.
  • [ACLN2] Heredia M., Bonnet J.F., Les diagnostics énergétiques dans les programmes régionaux : outils à l'échelle des exploitations agricoles et choix de nouvelles technologies. Sciences Eaux Territoires, No. 7, pp. 12-15, 2012.

Communications avec actes dans un congrès International

  • [ACTI1] Bisu C.F., Vintilescu A., Gérard A., Zapciu M., Cahuc O., A three-dimensional dynamic analysis using envelope method to milling process characterization. 4th International Conference on Structural Analysis of Advanced materials,, Sinaia, Roumanie, September 7-10, pp. 48-54, 2011.
  • [ACTI2] Cahuc O., Bisu C.F., Gérard A., Darnis P., Laheurte R., Correlation between torsor measurements on the chip orientation. 4th International Conference on Structural Analysis of Advanced materials,, Sinaia, Roumanie, September 7-10, pp. 88-96, 2011.
  • [ACTI3] Bisu C.F., Vintilescu A., Zapciu M., Gérard A., Tanase I., A vibration analysis method to monitor one-line quality milling process. 10th Biennal International Conference on Vibration Problems, Prague, Pologne, 5-8 septembre 2011, 2011.
  • [ACTI4] Royer R., Darnis P., Laheurte R., Gérard A., Cahuc O., Finite strain gradient plasticity theory for high speed machining. ICM11, Como, Italy, 5-9 juin, 2011.
  • [ACTI5] Bisu C.F., Zapciu M., Gérard A., New approach in diagnostics method for milling process using envelope analysis. International conference on Manufacturing Engineering, Venice, Italy, 28-30 novembre, 2011.
  • [ACTI6] Royer R., Laheurte R., Darnis P., Gérard A., Cahuc O., Second strain gradient plasticity theory applied to machining. 13th ESAFORM Conference on Material and Forming, Brescia, Italy, 7-9 April, 2011.
  • [ACTI7] Gey N., Blaineau P., Germain L., Humbert M., Barbier D., Perlade A., Restitution of the shapes and orientations of the prior austenitic grains from inherited alpha' orientation maps in steels. International Conference on Solid-Solid Phase Transformations in Inorganic Materials, Avignon, France, 060/06-11/06 2010, Diffusion and Defect Data--Solid State Data, Pt. B: Solid State Phenomena, Vol. 172-174, pp. 911-915, DOI 10.4028/www.scientific.net/SSP.172-174.911, 2011.
  • [ACTI8] Calamaz M., Coupard D., Girot F., The feasibility of strain field measurement with correli in orthogonal machining of titanium alloy. 4th Manufacturing Engineering Society International Conference, Cadix, Espagne, 21-23 septembre, 2011.
  • [ACTI9] Perry N., Pompidou S., Mantaux O., Leray D., Design for Recycling of Carbon Thermoset Composites: Connection between Recyclers and Designers through Experts in Material Characterization. 3rd International Conference on Carbon Composites, Arcachon, France, 25-27 october, 2011.
  • [ACTI10] Perry N., Kromm F.X., Lorriot T., Pompidou S., Mantaux O., Research orientations in design for recovery applied to composite parts. International Conference on Industrial Engineering and Systems Management, Metz, France, May 25-27, Ed. I4e2, pp. 458-465, ISBN/ISSN ISBN 978-2-9600532-3-4, 2011.
  • [ACTI11] Perry N., Kromm F.X., Pompidou S., Mantaux O., Design for recycling problematic: application to composite parts. 5th International Conference on Innovative Methods in Product Design, Venice, Italy, June 15-17, ISBN/ISSN 978-887784-328-9, 2011.
  • [ACTI12] Jallageas J., Cherif M., K'Nevez J.Y., Cahuc O., Optimization of drilling assisted forced vibration on positive feed units. 4th International Conference on Structural Analysis of Advanced materials,, Sinaia, Roumanie, September 7-10, 2011.
  • [ACTI13] Cazaurang G., Mazzolini J., Valette J., Experimental analysis of LRI carbon/aramide thick plates. 3rd International Conference on Carbon Composites, Arcachon, France, 25-27 october, 2011.
  • [ACTI14] Wahl J.C., Malenfant J.C., Bois C., Danis M., Lasseux D., Pailhes J., Influence of thermomechanical loading on composite material permeability: application to the design of a linerless cryogenic tank. 3rd International Conference on Carbon Composites, Arcachon, France, 25-27 october, 2011.
  • [ACTI15] Jallageas J., Cherif M., K'Nevez J.Y., Cahuc O., Optimization of drilling assisted forced-excited vibrations on positive feed units. 9th International Conference of High Speed Machining, San Sebastian, Espagne, 7-8 March 2012, 2012.
  • [ACTI16] Bisu C.F., Laheurte R., Darnis P., Gérard A., Dynamic Behavior Characterization of the Milling Tool During the Cutting Process. World Congress on Engineering, London, England, 4-6 july, 2012.
  • [ACTI17] André D., Iordanoff I., Charles J.L., Néauport J., Modélisation par éléments discrets des phases de doucissage de la silice. 24èmes Journées Internationales Francophones de Tribologie, Aix en Provence, France, 9-11 mai, 2012.
  • [ACTI18] André D., Iordanoff I., Charles J.L., Discrete element method to simulate brittle elastic material by using the cohesive beam model. 6th European Congress on Computational Methods in Applied Sciences and Engineering, Vienna, Austria, september 10-14, 2012.
  • [ACTI19] Terreros I., Iordanoff I., Charles J.L., Discrete element simulation of damageable elastoplastic materials. 6th European Congress on Computational Methods in Applied Sciences and Engineering, Vienna, Austria, september 10-14, 2012.
  • [ACTI20] Jebahi M., Charles J.L., Dau F., Iloul L., Iordanoff I., On the H1 discrete - continuum coupling based on the Arlequin method (DEM-CNEM). 6th European Congress on Computational Methods in Applied Sciences and Engineering, Vienna, Austria, september 10-14, pp. 7685-7697, ISBN/ISSN 978-395035370-9, 2012.
  • [ACTI21] Germain L., Blaineau P., Gey N., Humbert M., Current approaches for reconstructing the parent microtexture from that inherited by phase transformation. 16th International Conference on Textures of Materials, Bombay, Inde, 12/12-17/12 2011, Materials Science Forum, Vol. 702-703, pp. 846-849, DOI 10.4028/www.scientific.net/MSF.702-703.846, 2012.
  • [ACTI22] Humbert M., Blaineau P., Germain L., Gey N., Determination of the orientation relation from variants inherited by phase transformation. 16th International Conference on Textures of Materials, Bombay, Inde, 12/12-17/12 2011, Materials Science Forum, Vol. 702-703, pp. 862-865, DOI 10.4028/www.scientific.net/MSF.702-703.862, 2012.
  • [ACTI23] Lacoste E., Arvieu C., Numerical simulation of heat and mass transfer during high speed liquid route processing of titanium matrix composites. 15th European Conference on Composite Materials, Venice, Italy, June 24-28, No. 974, 2012.
  • [ACTI24] Lavalette A., Pommier R., Danis M., Castera P., Tension-shear (TS) failure criterion for a wood composite designed for shipbuilding applications. World Conference on Timber Engineering, Auckland, Nouvelle-Zélande, 15-19 juillet, 2012.
  • [ACTI25] Calamaz M., Coupard D., Girot F., Strain field measurement in orthogonal machining of a titanium alloy. Advanced materials research, Vol. 498, pp. 237-242, DOI 10.4028/www.scientific.net/AMR.498.237, ISBN/ISSN 978-303785359-7, 2012.
  • [ACTI26] Batista M., Calamaz M., Girot F., Salguero J., Marcos M., Using image analysis techniques for single evaluation of the chip shrinkage factor in orthogonal cutting process. Key Engineering Materials, Vol. 504-506, pp. 1329-1334, DOI 10.4028/www.scientific.net/KEM.504-506.1329, ISBN/ISSN 978-303785366-5, 2012.
  • [ACTI27] Calamaz M., Coupard D., Gutiérrez-Orrantia M.E., Béga J., Girot F., Chip/tool interaction during dry machining of the TA6V alloy. Advanced materials research, Vol. 445, pp. 183-188, DOI 10.4028/www.scientific.net/AMR.445.183, ISBN/ISSN 978-303785346-7, 2012.
  • [ACTI28] Bisu C.F., Olteanu L., Laheurte R., Darnis P., Cahuc O., Experimental approach on torsor dynamic analysis for milling process monitoring and diagnosis. 8th CIRP Conference on Intelligent Computation in Manufacturing Engineering, Ischia, Italy, 17-20 july, Ed. Published by Elsevier (under responsibility of Professor Roberto Teti), No. A2, 2012.
  • [ACTI29] Kromm F.X., Arvieu C., Lecomte J., Galy C., Manufacturing process and characterisation of C/C large diameter filament. 15th European Conference on Composite Materials, Venice, Italy, June 24-28, 2012.
  • [ACTI30] Iordanoff I., Charles J.L., André D., Development of the GranOO discrete element platform for dynamic problems: Application for tribological application. International Joint Tribology Conference, Denver, CO, USA, October 7-10, Ed. ASME/STLE, pp. 325-329, DOI 10.1115/IJTC2012-61200, ISBN/ISSN 978-079184508-0, 2012.
  • [ACTI31] Le Goff E., Bois C., Wargnier H., Wahl J.C., Impact of material degradations on load transfer and assembly behavior. Application to reinforced holes in composite assembly. 15th European Conference on Composite Materials, Venice, Italy, June 24-28, 2012.
  • [ACTI32] Bois C., Wargnier H., Wahl J.C., Le Goff E., Design of hybrid (bonded/fastener) composite joints:from load transfer toward strength prediction. 15th European Conference on Composite Materials, Venice, Italy, June 24-28, 2012.
  • [ACTI33] Mehdizadeh R., Breysse D., Taillandier F., Niandou H., Dynamic and multi perspective risk management in construction with special view to temporary structures. 6th International Forum on Engineering Decision Making, Lake Louise, Canada, 26-29 janvier, 2012.
  • [ACTI34] Jallageas J., Cherif M., K'Nevez J.Y., Cahuc O., A New Vibration System for Advanced Drilling Composite-Metallic Stacks. SAE 2013 AeroTech Congress & Exhibition, Montréal, Canada, 24-26 septembre, 2013.
  • [ACTI35] Barelli F., Dessein G., Darnis P., Laheurte R., Cahuc O., Mousseigne M., Rubio W., Machinability of Titanium Alloys (TA6V αβ, β) and workpiece deformation. The 5th International Conference on Structural Analysis of Advanced Materials, Island of Kos, Greece, 23-26 September, 2013.
  • [ACTI36] Ladonne M., Landon Y., Cahuc O., Cherif M., K'Nevez J.Y., De Castelbajac C., Dynamic Modeling of Vibrations Assisted Drilling. The 5th International Conference on Structural Analysis of Advanced Materials, Island of Kos, Greece, 23-26 September, 2013.
  • [ACTI37] Breysse D., Tepeli E., Khartabil F., Taillandier F., Mehdizadeh R., Morand D., Project risk management in construction projects: developing modeling tools to favour a multidisciplinary approach. 11th International Conference on Structural Safety and Reliability, New-York, Etats-Unis, 16-20 juin, pp. 173-180, 2013.
  • [ACTI38] André D., Charles J.L., Iordanoff I., A new C++ workbench to develop discrete element simulations: GranOO. 2nd ECCOMAS Young Investigators Conferences, Bordeaux, France, September 02-06, 2013.
  • [ACTI39] Jebahi M., André D., Charles J.L., Dau F., Iordanoff I., A multi-scale coupling method to simulate the silica glass behavior under high pressures. 2nd ECCOMAS Young Investigators Conferences, Bordeaux, France, September 02-06, 2013.
  • [ACTI40] Clouet B., Pommier R., Danis M., New composite timbers, full field analysis of adhesive behavior. Composite Materials and Joining Technologies for Composites, New-York, Etats-Unis, 11-14 juin 2012, Vol. 7, pp. 51-58, DOI 10.1007/978-1-4614-4553-1_6, ISBN/ISSN 978-1-4614-4552-4, Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics. Conference Proceedings of the Society for Experimental Mechanics Series 44, Springer, 2013.
  • [ACTI41] Breysse D., Mehdizadeh R., Taillandier F., Tepeli E., Systemic analysis of risks in project management and safety issues. Fifht International Conference on Forensic Engineering, Londres, Grande-Bretagne, 15-17 avril, 2013.
  • [ACTI42] Blaineau P., Laheurte R., Darnis P., Darbois N., Cahuc O., Néauport J., Relationships between subsurface damage depth and surface roughness of grinded glass optics. OPTIFAB 2013, Rocherster, Etats Unis, 14/10-17/10, Ed. SPIE, Ed. Proc. SPIE, Vol. 8884, pp. 88840C, DOI 10.1117/12.2028880, 2013.

Communications avec actes dans un congrès National

  • [ACTN1] Mehdizadeh R., Breysse D., Taillandier F., Niandou H., Advanced methodology of Risk breakdown structure developing for risk management of tunneling and construction projects. 29èmes Rencontre Universitaires de Génie Civil, Tlemcen, Algérie, 29-31 mai, 2011.
  • [ACTN2] Taillandier F., Mehdizadeh R., Breysse D., Evaluation et agrégation des risques pour les projets de construction par le recours aux Risk Breakdown Structures. 29èmes Rencontre Universitaires de Génie Civil, Tlemcen, Algérie, 29-31 mai, 2011.
  • [ACTN3] Mehdizadeh R., Breysse D., Taillandier F., Niandou H., Modeling methodology of the risk breakdown structure for project risk management in construction. Entretiens RGCU, Paris, France, 18 mars, poster, 2011.
  • [ACTN4] Mehdizadeh R., Breysse D., Taillandier F., Niandou H., RBS (Risk breakdown structure) : une méthodologie pour la gestion des risques des projets de construction. Journées Techniques Génie Civil, Cachan, France, 22-23 mars, 2011.
  • [ACTN5] Jallageas J., Cahuc O., Cherif M., K'Nevez J.Y., Modélisation du perçage vibratoire sur UPA. 20ème Congrès Français de Mécanique, Besançon, France, 28 août-2 septembre, 2011.
  • [ACTN6] André D., Iordanoff I., Charles J.L., Néauport J., Modèle par éléments discrets pour l’étude du comportement dynamique d’un matériau élastique. Méthodologie de quantification des paramètres microscopiques. . 10ème Colloque National en Calcul des Structures, Giens, France, 9-13 mai, 2011.
  • [ACTN7] Terreros I., Iordanoff I., Charles J.L., Simulation de la conduction de la chaleur dans un milieu continu par un modèle éléments discrets. 20ème Congrès Français de Mécanique, Besançon, France, 28 août-2 septembre, 2011.
  • [ACTN8] Ghazali E., Bertran X., Denux D., Xu C., Pedros M., Lacoste E., Perry N., Elaboration de composites par cuisson rapide : modélisation numérique du couplage thermo-chimique. 17ème Journées Nationales sur les Composites, Poitiers, France, 15-17 juin, No. paper 160, 2011.
  • [ACTN9] Ghazali E., Xu C., Lacoste E., Perry N., Simulation numérique des couplages thermo-mécaniques induits par les procédés de cuisson rapide de composites. 20ème Congrès Français de Mécanique, Besançon, France, 28 août-2 septembre, No. paper 706, 2011.
  • [ACTN10] Pichot F., Danis M., Lacoste E., Danis Y., Définition d’une source de chaleur représentant l’apport de chaleur pour le soudage TIG. 20ème Congrès Français de Mécanique, Besançon, France, 28 août-2 septembre, No. paper 703, 2011.
  • [ACTN11] Cherif M., Perçage vibratoire des composites et des multi-matériaux. JEC, PAris, France, 6 décembre, 2011.
  • [ACTN12] Iordanoff I., André D., Charles J.L., Viot P., Méthode des éléments discrets : des problèmes multi-corps aux problèmes d’endommagement dynamique complexes. 10ème Colloque National en Calcul des Structures, Giens, France, 9-13 mai, 2011.
  • [ACTN13] Taillandier F., Hamzaoui F., Mehdizadeh R., Breysse D., Allal A., Gestion des projets de construction par des RBS évolutives – Application à un réseau de voie ferrée en Algérie. Journées de la Fiabilité des Matériaux et des Structures, Chambéry, France, 4 - 6 juin, 2012.
  • [ACTN14] Princaud M., Pompidou S., Perry N., Mantaux O., Identification des bases d’une synergie entre recycleurs et concepteurs : application au cas des composites. 13ème Démarche et innovation dans la conception et la production des systèmes intégrés, Mont Dore, France, 27-30 mars, Ed. AIP Priméca, 2012.
  • [ACTN15] Pateloup S., Chanal H., Duc E., Adaptation des paramètres du processus d’usinage au comportement d’une machine outil complexe. 7ème INTERCUT MUGV 2012 SAINT-ETIENNE, Saint-Etienne, FRANCE, 17-18 octobre, 2012.
  • [ACTN16] Clouet B., Pommier R., Caractérisation optique du comportement au séchage d’une bois massif reconstitué collé à l’état vert. 30ième Rencontres de l'Association Universitaire de Génie Civil - International Building Performance Simulation Association, Chambéry, France, 6-8 juin, 2012.
  • [ACTN17] Ladonne M., Cherif M., Landon Y., K'Nevez J.Y., Cahuc O., De Castelbajac C., Analyse dynamique du procédé de perçage assisté par vibration forcées basse fréquence sur des empilages multi-matériaux. 7ème INTERCUT MUGV 2012 SAINT-ETIENNE, Saint-Etienne, FRANCE, 17-18 octobre, 2012.
  • [ACTN18] Goossens F., Cherif M., Cahuc O., Analyse expérimentale et modélisation du procédé de polissage abrasif de l’INOX 316L. 21ème Congrès Français de Mécanique, Bordeaux, France, 26-30 août, 2013.
  • [ACTN19] Yousfi W., Cahuc O., Darnis P., Laheurte R., Calamaz M., Analyse de la sensibilité et des domaines de validité des modélisations analytiques de la coupe. 21ème Congrès Français de Mécanique, Bordeaux, France, 26-30 août, 2013.
  • [ACTN20] Ladonne M., Cherif M., Landon Y., K'Nevez J.Y., Cahuc O., Castelbajac De C., Modélisation du procédé de perçage assisté par vibrations. 21ème Congrès Français de Mécanique, Bordeaux, France, 26-30 août, 2013. Sous presse.
  • [ACTN21] Blaineau P., Laheurte R., Darnis P., Darbois N., Cahuc O., Néauport J., Relations between subsurface damage depth and surface roughness using the Abbott Firestone curve. 21ème Congrès Français de Mécanique, Bordeaux, France, 26-30 août, 2013.
  • [ACTN22] Royer R., Cahuc O., Lindgren L.E., Jacquin D., Darnis P., Laheurte R., Loi de comportement pour la modélisation de l’usinage: Densité de dislocations et second gradient. 21ème Congrès Français de Mécanique, Bordeaux, France, 26-30 août, 2013.
  • [ACTN23] Lavalette A., Danis M., Pommier R., Elbez G., Cointe A., Delisée C., Analyse de l'influence des paramètres de collage d'un contreplaqué à l'état vert sur ses propriétés mécaniques. 21ème Congrès Français de Mécanique, Bordeaux, France, 26-30 août, 2013.
  • [ACTN24] André D., Jebahi M., Iordanoff I., Charles J.L., Néauport J., Modélisation par éléments discrets de matériaux élastiques fragiles. Application à l’essai d’indentation sur verre de silice. 11ème Colloque National en Calcul des Structures, Giens, France, 13-17 Mai 2013, 2013.
  • [ACTN25] Charles J.L., André D., Iordanoff I., GranOO : plateforme de simulation DEM en dynamique explicite. 11ème Colloque National en Calcul des Structures, Giens, France, 13-17 Mai 2013, 2013.
  • [ACTN26] Lavalette A., Elbez G., Pommier R., Danis M., Delisée C., Etude de la mouillabilité du bois par un adhésif polyuréthane : application au collage du pin maritime à l'état vert. 2èmes Journées Scientifiques du GDR Sciences du Bois, Champs sur Marne, France, 19-21 novembre, 2013.
  • [ACTN27] Gillet A., Mantaux O., Interaction microstructure/propriétés dans un matériau composite à fibres de carbone recyclées. 21ème Congrès Français de Mécanique, Bordeaux, France, 26-30 août, 2013.
  • [ACTN28] Cherif M., Bois C., Landon Y., Rôle des défauts de perçage sur le comportement en matage des composites stratifiés sous sollicitation de fatigue. AMAC Journée Scientifique et Technique Assemblage des structures composites, Bordeaux, France, 18/11/2013, Ed. AFM, 2013.
  • [ACTN29] Cherif M., Landon Y., Etude de l'état de surface de trous percé dans des stratifiés carbone UD. 21ème Congrès Français de Mécanique, Bordeaux, France, 26-30 août, 2013.
  • [ACTN30] Ghazali E., Lacoste E., Arvieu C., Hascoët J.Y., Simulation numérique des couplages thermomécaniques par un procédé de fusion laser (ALM) : prédiction des déformations résiduelles. 21ème Congrès Français de Mécanique, Bordeaux, France, 26-30 août, pp. paper 699T93EC, 2013.
  • [ACTN31] Clouet B., Pommier R., Mindeguia J.C., Danis M., Comportement mécanique d'un bois contrecollé à l'état vert lors de transferts hydriques : modélisation numérique et validation expérimentale. Journées thématiques sur les Techniques d'Imagerie pour la Caractérisation des Matériaux et Structures du Génie Civil, Clermont-Ferrand, France, 20-21 mars, 2014.

COMmunications sans actes dans un congrès national ou international

  • [COM1] Blaineau P., Germain L., Gey N., Humbert M., Reconstruction of high temperature parent orientation maps, an application to various low alloyed steels. 20th annual meeting on Electron Back Scattering Diffraction, Düsseldorf, Allemagne, 28/03-31/03, 2011.
  • [COM2] Cazaurang G., Mazzolini J., Valette J., Experimental analysis of process/properties link for carbon/Kevlar thick composite obtained by Liquid Resin Infusion. GDR 3371 : Mise en œuvre des composites et propriétés induites, Nantes, France, 17-18 octobre, 2011.
  • [COM3] Jallageas J., Cherif M., K'Nevez J.Y., Cahuc O., Etude du perçage vibratoire sur un empilage CFRP/Titane. AMAC Journée Technique Usinage composite, Châtillon, France, 23 mai, 2012.
  • [COM4] Cherif M., Usinage des multimatériaux. Jec Journée technique Usinage des composites, Nantes, France, 11/12/12, Conférence invitée, 2012.
  • [COM5] Mantaux O., Ausset S., Lopez-Cuesta J.M., Perrin D., Ohl B., Mascaro J.F., Formulation d’ABS-PC recyclé dans l’optique d’une réutilisation dans des pièces extrudées. Les défis scientifiques du recyclage - Contribution de la Chimie, Metz, France, 26, 27 et 28 Novembre, 2012.
  • [COM6] Perrin D., Beigbeder J., Lopez-Cuesta J.M., Mascaro J.F., Telliez C., Mantaux O., Freyssinet P., Nouvelles technologies de tri et d’identification des matières plastiques – Avantages et limites -Applications aux DEEE. Les défis scientifiques du recyclage - Contribution de la Chimie, Metz, France, 26, 27 et 28 Novembre, 2012.
  • [COM7] Royer R., Cahuc O., Modeling the material behaviour during machining using strain gradient plasticity. Indo-Swedish International Workshop on Design of Materials Manufacturing & Products, Cape East, Haparanda, Sweden, June 19-20, Conférence invitée, 2012.
  • [COM8] Montoya M., Calamaz M., Géhin D., Girot F., Influence of drill geometrical parameters on drilling performance of thick CFRP/ Aluminium alloy stacks. 16th ESAFORM Conference on Material Forming, Aveiro, Portugal, 22-24 avril 2013, 2013.
  • [COM9] Huchon N., Charles J.L., Matadi Boumbimba R., Iordanoff I., Froustey C., Contribution à l'étude et à la modélisation du comportement mécanique de modules photovoltaïques soumis à des impacts. 21ème Congrès Français de Mécanique, Bordeaux, France, 26-30 août, 2013.
  • [COM10] Goupil A., Iordanoff I., Charles J.L., Rinchet A., Modelling of polishing tools for high spatial frequency defect correction on aspherical surfaces. 16th ESAFORM Conference on Material Forming, Aveiro, Portugal, 22-24 avril 2013, Vol. 554-557, pp. 1232-1241, DOI 10.4028/www.scientific.net/KEM.554-557.1232, ISBN/ISSN 978-303785719-9, 2013.

Ouvrages Scientifiques

  • [OS1] Bisu C.F., Cherif M., Gérard A., K'Nevez J.Y., Dynamic Behavior Analysis for a Six Axis Industrial Machining Robot. Advanced materials research, Vol. 423, pp. 65-76, DOI 10.4028/www.scientific.net/AMR.423.65, ISBN/ISSN ISSN 1022-6680, 2012.
  • [OS2] Gérard A., Gérard C., Cahuc O., Zapciu M., Bisu C.F., Thermomécanique et Modélisation du Comportement des Matériaux. Book, Academy of Romanian Scientists Publishing HOUSE - Editura Academiei Oamenilor de Stiinta din România, pp. 232 pages, ISBN/ISSN ISBN : 978-606-8371-19-1, 2012.
  • [OS3] Landon Y., Cherif M., CHARACTERIZATION OF THE SURFACES TEXTURE OF HOLES DRILLED IN CFRP LAMINATES. Advanced materials research, Vol. 698, pp. 107-116, 2013.
  • [OS4] Vintilescu A., Jallageas J., Cherif M., K'Nevez J.Y., Optimizing the Drilling Process of Multi-Layer Materials Using Vibration Analysis. Applied Mechanics and Materials, Vol. 325 - 326, pp. 28 - 33, DOI 10.4028/www.scientific.net/AMM.325-326.28, 2013.

Chapitres d'Ouvrages Scientifiques

  • [COS1] Perry N., Mantaux O., Leray D., Lorriot T., Composite recycling: design for environment approach requirements. In: Recent Advances in Integrated Design and Manufacturing in Mechanical Engineering (Chap. GEDI) (Research in Interactive Design Vol 3). pp. 69, ISBN/ISSN 9782817801681, 2011.
  • [COS2] Pompidou S., Princaud M., Perry N., Leray D., Recycling of carbon fiber. Identification of bases for a synergy between recyclers and designers. In: Volume 3: Advanced Composite Materials and Processing; Robotics; Information Management and PLM; Design Engineering (ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis). 11th ASME Engineering Systems Design and Analysis, Nantes, France, july 2-4, Vol. 3, pp. 551-559, ISBN/ISSN 978-0-7918-4486-1, 2012.
  • [COS3] Perry N., Pompidou S., Mantaux O., Gillet A., Composite Fiber Recovery: Integration into a Design for Recycling Approach (Chap. 14), in Technology and Manufacturing Process Selection: the Product Life Cycle Perspective. Ed. Springer, pp. 281-296, ISBN/ISSN 9781447155430, 2014. Sous presse.

Brevets

  • [BRVT1] Franchet J.M., Fromentin J.F., Quenisset J.M., Duda C., Arvieu C., Frayssines P.E., Method for metallic coating of fibres by liquid technique. No. US7687114B2, 2011.
  • [BRVT2] Jallageas J., K'Nevez J.Y., Cherif M., Cahuc O., Brevet Système vibratoire déposé par l’Université de Bordeaux-I, l’IPB et le CNRS le 12/02/2013. No. N° FR1351198, 2013.
  • [BRVT3] Mantaux O., Leray D., Gillet A., Procédé de détissage et de réalignement de fibres de carbone. No. FR1353803, 2013.