Liste des publications du département IMC

Articles dans des revues Internationales avec Comité de Lecture répertorié

  • [AICL1] Teissandier D., Delos V., Algorithm for the calculation of the Minkowski sums of 3-polytopes based on normal fans. Computer-Aided Design, Vol. 43, pp. 1567-1576, 2011.
  • [AICL2] Collignan A., Sebastian P., Pailhes J., Ledoux Y., Optimization of product in dynamic design space and selection through the arc-elasticity concept. International Journal on Interactive Design and Manufacturing, Vol. 5, No. 4, pp. 243-254, 2011.
  • [AICL3] Ledoux Y., Lasseux D., Favreliere H., Samper S., Grandjean J., On the dependence of static flat seal efficiency to surface defects. International Journal of Pressure Vessels and Piping, Vol. 88, No. 11-12, pp. 518-529, DOI 10.1016/j.ijpvp.2011.06.002, 2011.
  • [AICL4] Guillebaud C., Touchard F., Chocinski L., Damage mechanisms in hemp-fibre woven fabric composite, and comparison with glass-fibre composite. Polymers and Polymer Composites, Vol. 19, No. 7, pp. 543-552, ISBN/ISSN 09673911, 2011.
  • [AICL5] Mouton S., Ledoux Y., Teissandier D., Sebastian P., Composite part design based on numerical simulation of the manufacturing process. The International Journal of Advanced Manufacturing Technology, Vol. 55, No. 5-8, pp. 421-431, 2011.
  • [AICL6] Toutain J., Battaglia J.L., Pradere C., Pailhes J., Kusiak A., Aregba W., Batsale J.C., Numerical Inversion of Laplace Transform for Time Resolved Thermal Characterization Experiment. Journal of Heat Transfer, Vol. 133, No. 4, DOI 10.1115/1.4002777, Paper ID : 044504, 2011.
  • [AICL7] Ramos A., Ballu A., Mesnard M., Talaia P., Simões J.A., Numerical and experimental models of the mandible. Experimental Mechanics, Vol. 51, No. 7, pp. 1053-1059, 2011.
  • [AICL8] Ramos A., Completo A., Relvas C., Mesnard M., Simoes J., Straight, semi-anatomic and anatomic TMJ implants: The influence of condylar geometry and bone fixation screws. Journal of Cranio-Maxillofacial Surgery, Vol. 39, No. 5, pp. 343-350, 2011.
  • [AICL9] Mesnard M., Ramos A., Ballu A., Morlier J., Cid M., Simões J.A., Biomechanical analysis comparing natural and alloplastic TMJ replacement using a finite element model. Journal of Cranio-Maxillofacial Surgery, Vol. 69, No. 4, pp. 1008-1017, 2011.
  • [AICL10] Pailhes J., Sallaou M., Nadeau J.P., Fadel G., Energy based functional decomposition in preliminary design. Journal of Mechanical Design, Vol. 133, No. 5, pp. 051011.1-051011.10, DOI 10.1115/1.4004193, 2011.
  • [AICL11] Perry N., Bernard A., Laroche F., Pompidou S., Improving design for recycling - Application to composites. Ed. Elsevier, CIRP Annals - Manufacturing Technologies, Vol. 61, No. 1, pp. 151-154, DOI 10.1016/j.cirp.2012.03.081, 2012.
  • [AICL12] Collignan A., Sebastian P., Pailhes J., Ledoux Y., Arc-elasticity and hierarchical exploration of the neighborhood of solutions in mechanical design. Advanced Engineering Informatics, Vol. 26, No. 3, pp. 603–617, 2012.
  • [AICL13] Quirante T., Ledoux Y., Sebastian P., Multiobjective optimization including design robustness objectives for the embodiment design of a two-stage flash evaporator. International Journal on Interactive Design and Manufacturing, Vol. 6, No. 1, pp. 29-39, 2012.
  • [AICL14] Guillebaud C., Vasconcellos D., Touchard F., Chocinski L., Experimental and numerical investigation of the interface between epoxy matrix and hemp yarn. Composites Part A: Applied Science and Manufacturing, Vol. 43, No. 11, pp. 2046-2058, DOI 10.1016/j.compositesa.2012.07.015, ISBN/ISSN 1359835X, 2012.
  • [AICL15] Mesnard M., Coutant J.C., Aoun M., Morlier J., Cid M., Caix P., Relationships between geometry and kinematic characteristics in the temporomandibular joint. Computer Methods in Biomechanics and Biomedical Engineering, Vol. 15, No. 4, pp. 393-400, ISBN/ISSN 1025-5842, 2012.
  • [AICL16] Grandjean J., Le Goic G., Favreliere H., Ledoux Y., Samper S., Formosa F., Devun L., Gradel T., Multi-scalar analysis of hip implant components using modal decomposition. Measurement Science and Technology, Vol. 23, No. 12, 2012.
  • [AICL17] Pailhes J., Pradere C., Battaglia J.L., Toutain J., Kusiak A., Aregba W., Batsale J.C., Thermal quadrupole method with internal heat sources. International Journal of Thermal Sciences, Vol. 53, pp. 49-55, 2012.
  • [AICL18] Puel F., Morlier J., Avalos M., Mesnard M., Cid M., Hellard P., 3D kinematic and dynamic analysis of the front crawl tumble turn in ten elite male. Journal of Biomechanics, Vol. 45, No. 3, pp. 510-515, 2012.
  • [AICL19] Leduigou J., Bernard A., Perry N., Delplace J.C., Generic PLM system for SMEs: Application to a nautical equipment manufacturer. International Journal of Product Lifecycle Management, Vol. 6, No. 1, 2012.
  • [AICL20] Leduigou J., Bernard A., Perry N., Framework for PLM integration in SMEs networks. Computer-Aided Design and Applications, Vol. 8, No. 4, pp. 531-544, 2012.
  • [AICL21] Bosch-Mauchand M., Siadat A., Perry N., Bernard A., VCS: Value Chains Simulator, a Tool for Value Analysis of Manufacturing Enterprise Processes (A Value-Based Decision Support Tool). Journal of Intelligent Manufacturing, Vol. 8, No. 1, pp. 1-14, 2012.
  • [AICL22] Quirante T., Sebastian P., Ledoux Y., A trade-off function to tackle robust design problems in engineering. Journal of engineering Design, Vol. 24, No. 1, pp. 64-81, 2013.
  • [AICL23] Ben Salem N., Bresson G., Jumel J., Shanahan M.E.R., Bellut S., Lavelle F., Weibull Analysis of Stiffness and Strength in Bulk Epoxy Adhesives Reinforced with Particles. Journal of Adhesion Science and Technology, Vol. 27, No. 21, pp. 2278-2295, 2013.
  • [AICL24] Bois C., Wargnier H., Wahl J.C., Le Goff E., An analytical model for the strength prediction of hybrid (bolted/bonded) composite joints. Composite Structures, Vol. 97, pp. 252–260, 2013.
  • [AICL25] Abot A., Guillebaud C., Touchard F., Thibault F., Chocinski L., Lemoine R., Dédaldéchamp F., Effects of cultural conditions on the hemp (Cannabis sativa) phloem fibres: Biological development and mechanical properties. Journal of Composite Materials, Vol. 47, No. 8, pp. 1067-1077, DOI 10.1177/0021998313477669, 2013.
  • [AICL26] Ben Salem N., Budzik M.K., Jumel J., Shanahan M.E.R., Lavelle F., Investigation of the Crack Front Process Zone in the Double Cantilever Beam Test with Backface Strain Monitoring Technique. Engineering Fracture Mechanics, Vol. 98, pp. 272-283, 2013.
  • [AICL27] Perry N., Wahl J.C., Bois C., Pilato A., Bernard A., Thick composite design for hydrogen vessels: a contribution to composite design method. Ed. Elseiver, CIRP Annals - Manufacturing Technologies, Vol. 62, No. 1, pp. 139–142, 2013.
  • [AICL28] Errotabehere X., Bois C., Dumon M., Le Houérou V., Gauthier C., Experimental and numerical analysis of the blistering of a polymeric coating during scratching process. Progress in Organic Coatings, 2013. Soumis pour publication.
  • [AICL29] Bois C., Pilato A., Wahl J.C., Perry N., Proposal for a smart pressurized ring test to study thick composite produced by filament winding. Ed. Elseiver, Composites Part B : Engineering, Vol. 53, pp. 382–390, DOI dx.doi.org/10.1016/j.compositesb.2013.06.001, 2013.
  • [AICL30] Clouet B., Pommier R., Danis M., New composite timbers : full-field analysis of adhesive behaviour. The Journal of Strain Analysis for Engineering Design, Vol. 49, No. 3, pp. 155-160, DOI 10.1177/0309324713486894, 2013.
  • [AICL31] Grandjean J., Ledoux Y., Samper S., On the role of form defects in assemblies subject to local deformations and mechanical loads. The International Journal of Advanced Manufacturing Technology, Vol. 65, No. 9, pp. 1769-1781, 2013.
  • [AICL32] Ledoux Y., Teissandier D., Tolerance analysis of a product coupling geometric and architectural specifications in a probabilistic approach. Research In Engineering Design, Vol. 24, No. 3, pp. 297-311, 2013.
  • [AICL33] Pichot F., Danis M., Lacoste E., Danis Y., Numerical definition of an equivalent GTAW heat source. Journal of Materials Processing Technology, Vol. 213, pp. 1241– 1248, 2013.
  • [AICL34] Mesnard M., Ramos A., Towards a rigorous approach to designing a TemporoMandibular Joint prosthesis. From clinical challenge to numerical prototype. Procedia CIRP, Vol. 5, pp. 141-146, Best Paper Awar, 2013.
  • [AICL35] Lorriot T., Wargnier H., Wahl J.C., Proust A., Lagunegrand L., An experimental criterion to detect onset of delamination in real time. Journal of Composite Materials, DOI 10.1177/0021998313495069, ISBN/ISSN 21998313495069, 2013.
  • [AICL36] Ledoux Y., Teissandier D., Geometric variability analysis by a fiabilist approach : application to a turbine. Research In Engineering Design, Vol. 24, No. 3, pp. 297-311, 2013.
  • [AICL37] Teissandier D., Delos V., Homri L., Algorithm to calculate the Minkowski sums of 3-polytopes: application to tolerance analysis. Procedia CIRP, pp. 84-90, 2013.
  • [AICL38] Girardeau J., Pailhes J., Sebastian P., Pardo F., Nadeau J.P., Turbine Blade Cooling System Optimization. Journal of Turbomachinery, Vol. 135, 2013.
  • [AICL39] Rouault F., Bruneau D., Sebastian P., Lopez J., Numerical modelling of tube bundle thermal energy storage for free-cooling of buildings. Applied Energy, Vol. 111, pp. 1099-1106, 2013.
  • [AICL40] Anwer N., Ballu A., Mathieu L., The skin model, a comprehensive geometric model for engineering design. Annals of the CIRP, Vol. 62, No. 1, pp. 143–146, 2013.
  • [AICL41] Perry N., Pompidou S., Mantaux O., Information exchanges between experts for thermoset composites design for recycling. International Journal of Environment and Waste Management, Vol. 13, pp. 396-411, 2014.
  • [AICL42] Breysse D., Chaplain M., Marache A., Rodney E., Simulation of synthetic climate at local scale as a mean to assess the impact of climate change on infrastructures. Civil Engineering and Environmental Systems, DOI 10.1080/10286608.2014.912643, 2014.
  • [AICL43] Bois C., Malenfant J.C., Wahl J.C., Danis M., A multiscale damage and crack opening model for the prediction of flow path in laminated composite. Composites Science and Technology, Vol. 97, pp. 81-89, 2014.
  • [AICL44] Marques H., Ramos A., Mesnard M., How can the orientation of CT scanning undermine the biomechanical performance of the intact mandible? A finite element study. Computer Methods in Biomechanics and Biomedical Engineering, Vol. 2, No. 2, pp. 38-45, 2014.
  • [AICL45] Ramos A., Marques H., Mesnard M., The effect of mechanical properties of bone in the mandible, a numerical case. Advances in Biomechanics and Applications, Vol. 1, No. 1, 2014.
  • [AICL46] Ramos A., Mesnard M., Relvas C., Completo A., Simoes J., Theoretical assessment of an intramedullary condylar component versus screw fixation for the condylar component of a hemiarthroplasty alloplastic TMJ replacement system. Journal of Cranio-Maxillofacial Surgery, Vol. 42, No. 2, pp. 169-174, 2014.
  • [AICL47] Wargnier H., Kromm F.X., Danis M., Brechet Y., Proposal for a multi-material design procedure. Materials and Design, Vol. 56, pp. 44-49, 2014.
  • [AICL48] El Yagoubi J., Lubineau G., Saghir S., Verdu J., Askari A., Thermomechanical and hygroelastic properties of an epoxy system under humid and cold-warm cycling conditions. Journal of Polymer Degradation and Stability, Vol. 99, pp. 146-155, 2014.
  • [AICL49] Traidia A., El-Sherik A.M., Duval S., Lubineau G., El Yagoubi J., Model of parameters controlling resistance of pipeline steels to hydrogen-induced cracking. Corrosion, Vol. 70, pp. 87-94, 2014.
  • [AICL50] Catapano A., Montemurro M., A multi-scale approach for the optimum design of sandwich plates with honeycomb core. Part I: homogenisation of core properties. Composite Structures, DOI 10.1016/j.compstruct.2014.07.057, 2014.
  • [AICL51] Catapano A., Montemurro M., A multi-scale approach for the optimum design of sandwich plates with honeycomb core. Part II: the optimisation strategy. Composite Structures, DOI 10.1016/j.compstruct.2014.07.058, 2014.
  • [AICL52] Pierre L., Teissandier D., Nadeau J.P., Variational tolerancing analysis taking thermomechanical strains into account: application to a high pressure turbine. Mechanism And Machine Theory, Vol. 74, pp. 82–101, 2014.
  • [AICL53] Valverde U., Nadeau J.P., Scaravetti D., Leon J.F., Innovation through pertinent patents research based on physical phenomena involved. 24th CIRP Design Conference, Milano, Italy, April 14th-16th, Procedia CIRP, 2014.
  • [AICL54] Meteyer S., Xu X., Perry N., Zhao Y.F., Energy and Material Flow Analysis of Binder-jetting Additive Manufacturing Processes. International Journal of Production Research, 2014. Sous presse.
  • [AICL55] Princaud M., Aymonier C., Loppinet-Serani A., Perry N., Sonnemann G., Environmental feasibility of the recycling of carbon fibers from cfrps by solvolysis using supercritical water. ACS Sustainable Chemistry & Engineering, DOI 10.1021/sc500174m , 2014. Sous presse.
  • [AICL56] Mesnard M., Ramos A., Perry N., Managing the Variability of Biomechanical Characteristics before the Preliminary Design Stage of a Medical Device. CIRP Annals - Manufacturing Technologies, Vol. 63, No. 1, DOI 10.1016/j.cirp.2014.03.092, 2014. Sous presse.
  • [AICL57] Raffray G., Goli T., Rivier M., Sebastian P., Collignan A., Modeling of Mass Transfer During Hot-Smoking of Fish Fillets. Drying Technology, Vol. 32, No. 3, pp. 339-351, 2014.
  • [AICL58] Battaglia J.L., Saboul M., Pailhes J., Saci A., Kusiak A., Fudym O., Carbon epoxy composites thermal conductivity at 77K and 300K. Journal of Applied Physics, Vol. 115, No. 22, DOI 10.1063/1.4882300, Article ID : 223516, 2014.
  • [AICL59] Rouault F., Bruneau D., Sebastian P., Lopez J., Experimental investigation and modeling of a low temperature PCM thermal energy exchange and storage system. Energy and Buildings, Acceptée en avril 2014, 2014. Soumis pour publication.

Articles dans des revues Nationales avec Comité de Lecture répertorié

  • [ANCL1] Guillebaud C., Touchard F., Chocinski L., Dever C., Multi-scale analysis of the mechanical behaviour of woven hemp fabric composites. Comparison with flax and glass. Matériaux et Techniques, Vol. 99, No. 6, pp. 667-682, DOI 10.1051/mattech/2011136, ISBN/ISSN 00326895, 2011.
  • [ANCL2] Guillebaud C., Touchard F., Chocinski L., Dever C., Caractérisation expérimentale de l'interface fil/matrice dans les composites chanvre/époxy. Revue des Composites et des Matériaux Avancés, Vol. 3, No. 2012, pp. 327-340, ISBN/ISSN 978-2-7462-3987-6, 2012.

Articles dans des revues avec Comité de Lecture Non répertorié dans les bases de données internationales

  • [ACLN1] Sebastian P., Ledoux Y., Collignan A., Pailhes J., Linking objective and subjective modelling in engineering design through arc-elastic dominance. Expert Systems with Applications, Vol. 39, pp. 7743-7756, 2012.
  • [ACLN2] Dupe V., Sebastian P., Fischer X., Briand R., Decision support method for the design of embedded energy in autonomous Microsystems. Expert Systems with Applications, Vol. 39, pp. 13357-13365, 2012.
  • [ACLN3] Semassou G.C., Nadeau J.P., Sebastian P., Pailhes J., Vianou A., Optimisation multicritère en conception de système photovoltaïque pour des maisons individuelles en contexte africain. Revue des énergies renouvelables, Vol. 16, No. 2, pp.

Communications avec actes dans un congrès International

  • [ACTI1] Vasconcellos D., Guillebaud C., Touchard F., Chocinski L., 3D numerical model of single-yarn specimen of hemp/epoxy composite to simulate the yarn fragmentation process. 2nd International Conference on Material Modelling, Paris, France, August 31st-September 2nd, No. 112, 2011.
  • [ACTI2] Perry N., Pompidou S., Mantaux O., Leray D., Design for Recycling of Carbon Thermoset Composites: Connection between Recyclers and Designers through Experts in Material Characterization. 3rd International Conference on Carbon Composites, Arcachon, France, 25-27 october, 2011.
  • [ACTI3] Perry N., Kromm F.X., Lorriot T., Pompidou S., Mantaux O., Research orientations in design for recovery applied to composite parts. International Conference on Industrial Engineering and Systems Management, Metz, France, May 25-27, Ed. I4e2, pp. 458-465, ISBN/ISSN ISBN 978-2-9600532-3-4, 2011.
  • [ACTI4] Perry N., Kromm F.X., Pompidou S., Mantaux O., Design for recycling problematic: application to composite parts. 5th International Conference on Innovative Methods in Product Design, Venice, Italy, June 15-17, ISBN/ISSN 978-887784-328-9, 2011.
  • [ACTI5] Wahl J.C., Malenfant J.C., Bois C., Danis M., Lasseux D., Pailhes J., Influence of thermomechanical loading on composite material permeability: application to the design of a linerless cryogenic tank. 3rd International Conference on Carbon Composites, Arcachon, France, 25-27 october, 2011.
  • [ACTI6] Grondin J., Grimal Q., Guerard S., Barkmann R., Glüer C.C., In vitro evidence that the circumferential wave guided by the femur cortical shell can be used to predict femur strength. 4th European Symposium on Utrasonic Characterisation of Bone, Jyväskylä, Finland, June 19-21, 2011.
  • [ACTI7] Grandjean J., Le Goic G., Favreliere H., Ledoux Y., Samper S., Devun L., Gradel T., Metrological characterisation of hip implant by using discrete modal decomposition. 3rd The International Conference on Surface Metrology, Annecy, France, 21-23 mars 2012, 2011.
  • [ACTI8] Quirante T., Sebastian P., Ledoux Y., Development of a trade-off function for robust optimization problems in design engineering. 5th International Conference on Innovative Methods in Product Design, Venice, Italy, June 15-17, 2011.
  • [ACTI9] Grandjean J., Ledoux Y., Samper S., Influence of form errors in plane surfaces assemblies. 5th International Conference on Innovative Methods in Product Design, Venice, Italy, June 15-17, 2011.
  • [ACTI10] Lê H.N., Ledoux Y., Darnis P., Ballu A., Experimental comparison between displacements and surface defects measurements applied to planar joint. 5th International Conference on Innovative Methods in Product Design, Venice, Italy, June 15-17, 2011.
  • [ACTI11] Grandjean J., Le Goic G., Favreliere H., Ledoux Y., Samper S., Devun L., Analyse multi-échelle des composants articulaires d’une prothèse de hanche par la méthode modale. 4e Congrès International Conception et Modélisation des Systèmes Mécaniques, Sousse, Tunisie, 21 - 23 mars 2011, 2011.
  • [ACTI12] Mesnard M., Ramos A., Nyashin Y.I., Aoun M., Simoes J., Lokhov V.A., Analysis of TMJ replacement using a finite element model. 5th International Conference on Innovative Methods in Product Design, Venice, Italy, June 15-17, pp. 732-736, 2011.
  • [ACTI13] Lavalette A., Pommier R., Castera P., Danis M., Study of impregnation of green wood by specific elastomer. COST FP 0904 Thermo-hydro mechanical wood behaviour and processes, Biel, Switzerland, Feb. 16-18 2011, 2011.
  • [ACTI14] Teissandier D., Delos V., Algorithm to calculate the Minkowski sums of 3-polytopes dedicated to tolerance analysis. 5th International Conference on Innovative Methods in Product Design, Venice, Italy, June 15-17, 2011.
  • [ACTI15] Massard T., Harry R., Sanial P., Lorriot T., Charles J.P., Design with bi-angle ply laminates made from NCF carbon fiber materials. 6th International Conference on Composite Materials, Jeju, Korea, 21-26 August, 2011.
  • [ACTI16] Massard T., Harry R., Sanial P., Lorriot T., Perry N., Design with bi-angle ply laminates made from NCF carbon fiber materials. 1st Brazilian Conference on Composite Materials, Natal, Brésil, July 16-19, 2011.
  • [ACTI17] Collignan A., Pailhes J., Sebastian P., Design optimization : management of large solution spaces and optimization algorithm selection. 5th International Conference on Innovative Methods in Product Design, Venice, Italy, June 15-17, 2011.
  • [ACTI18] Girardeau J., Pailhes J., Nadeau J.P., Aerodynamics and Aerothermal Optimization of a Nozzle Guide Vane used in a aeronautical turboshaft engine. International Conference on Evolutionary and Deterministic Methods for Design, Optimization and Control with Applications to Industrial and Societal Problems, Capua, Italy, September 14–16, 2011.
  • [ACTI19] Xu Y., Bernard A., Perry N., Lian L., Managing knowledge management tools: a systematic classification and comparison. International Conference on Management and Service Science, Wuhan, France, August 2011, ISBN/ISSN 9781424465811, 2011.
  • [ACTI20] Alix T., Zacharewicz G., Perry N., Modèle d’analyse de la valeur de l’innovation des systèmes de produit – service. 9e Congrès International de Génie Industriel, Saint-Sauveur, Canada, octobre, 2011.
  • [ACTI21] Cazaurang G., Mazzolini J., Perry N., Questel J.H., Valette J., Experimental analysis of process/properties link for carbon/Kevlar thick composite obtained by Infusion. 3rd International Conference on Carbon Composites, Arcachon, France, 25-27 october, 2011.
  • [ACTI22] Ammar A., Scaravetti D., Nadeau J.P., Adaptation and implementation of a process of innovation and design within a SME. 5th International Conference on Innovative Methods in Product Design, Venice, Italy, June 15-17, 2011.
  • [ACTI23] Sandoval-Torres S., Nadeau J.P., Hernandez-Bautista E., Rodríguez-Ramírez J., Méndez-Lagunas L., Numerical simulation of drying of Pinus pseudostrobus wood with Comsol Multiphysics. European Drying Conference, Palma, Espagne, 26-28 October, 2011.
  • [ACTI24] Dupe V., Briand R., Fischer X., Sebastian P., Decision support system to design autonomous microsystems. 5th International Conference on Innovative Methods in Product Design, Venice, Italy, June 15-17, 2011.
  • [ACTI25] Rouault F., Sebastian P., Bruneau D., Ekomy Ango S., Numerical modelling of a real-scale air/PCM heat exchanger behaviour for free-cooling in buildings. 6th International Renewable Energy Storage Conference, Berlin, Allemagne, October, 30th - 31st, 2011.
  • [ACTI26] Mesnard M., Ramos A., An approach to designing a temporomandibular joint prosthesis. 3rd Temporomandibular Joint Bioengineering International Conference, Pittsburgh, USA, 19-24 September, pp. 15-17, 2012.
  • [ACTI27] Teissandier D., Delos V., Homri L., Algorithm to calculate the Minkowski sums of 3-polytopes: application to tolerance analysis. 12th CIRP International Seminar on Computer Aided Tolerancing, Huddersfield, UK, April 18-19, 2012.
  • [ACTI28] Lavalette A., Pommier R., Danis M., Castera P., Tension-shear (TS) failure criterion for a wood composite designed for shipbuilding applications. World Conference on Timber Engineering, Auckland, Nouvelle-Zélande, 15-19 juillet, 2012.
  • [ACTI29] Kromm F.X., Arvieu C., Lecomte J., Galy C., Manufacturing process and characterisation of C/C large diameter filament. 15th European Conference on Composite Materials, Venice, Italy, June 24-28, 2012.
  • [ACTI30] Le Goff E., Bois C., Wargnier H., Wahl J.C., Impact of material degradations on load transfer and assembly behavior. Application to reinforced holes in composite assembly. 15th European Conference on Composite Materials, Venice, Italy, June 24-28, 2012.
  • [ACTI31] Lozano D.E., Hinojosa Rivera M., Wahl J.C., Physical aspects and factors affecting surface quality in machined fiber reinforced polymer matrix composites. XXI International Materials Research Congress, Cancun, Mexico, August 12-17, 2012.
  • [ACTI32] Bois C., Wargnier H., Wahl J.C., Le Goff E., Design of hybrid (bonded/fastener) composite joints:from load transfer toward strength prediction. 15th European Conference on Composite Materials, Venice, Italy, June 24-28, 2012.
  • [ACTI33] Jumel J., Budzik M.K., Ben Salem N., Shanahan M.E.R., Blanca P.L., Application of Backface Strain Monitoring Technique to Delamination Test. 15th European Conference on Composite Materials, Venice, Italy, June 24-28, 2012.
  • [ACTI34] Jumel J., Budzik M.K., Ben Salem N., Investigation of cohesive force distribution during delamination test with the backface strain monitoring technique. 15th European Conference on Composite Materials, Venice, Italy, June 24-28, 2012.
  • [ACTI35] Sefrioui N., Ahmadi-Senichault A., Bertin H., Omari A., On the influence of ionic strength on colloid transport in porous media in the presence of a rough surface : numerical simulation at the microscopic scale. International Conference on ''Colloids and complex fluids -Colloids 2012 '', Rueil-Malmaison, France, October 17-19, 2012.
  • [ACTI36] Quirante T., Sebastian P., Ledoux Y., Development of trade-off function for optimization in robust design, A desirability based approach. 5th International conference on design computing and cognition, College Station, Texas, États Unis, 7-9 juin, 2012.
  • [ACTI37] Quirante T., Sebastian P., Ledoux Y., Modelisation de fonction objectif d’optimisation en conception robuste. 9ème Conférence Internationale de Modélisation, Optimisation et SIMulation, Bordeaux, France, 6-8 juin, 2012.
  • [ACTI38] Lê H.N., Ledoux Y., Darnis P., Ballu A., From surface defects of a planar joint to relative displacements and vice versa. 12th CIRP International Seminar on Computer Aided Tolerancing, Huddersfield, UK, April 18-19, 2012.
  • [ACTI39] Mesnard M., Ramos A., Nyashin Y.I., Aoun M., Simoes J., Lokhov V.A., Influence of cancellous bone characteristics in mandible behaviour. International Conference of the Polish Society of Biomechanics - International Society of Biomechanics, Bialystok, Poland, 09-2012, pp. 187-190, 2012.
  • [ACTI40] Girardeau J., Pailhes J., Pardo F., Nadeau J.P., Nozzle Guide Vane Cooling System Optimization. ASME Turbo Expo, Copenhague, Danemark, 11-15 juin, 2012.
  • [ACTI41] Charpentier F., Ballu A., Pailhes J., A scientific point of view of a simple industrial tolerancing process. 12th CIRP International Seminar on Computer Aided Tolerancing, Huddersfield, UK, April 18-19, 2012.
  • [ACTI42] Massard T., Lorriot T., Sanial P., Roland H., Perry N., Non crimp fabrics for advanced composites applications: a survey, 1st Brazilian Conference on Composite Materials. 1st Brazilian Conference on Composite Materials, Natal, Brésil, July 16-19 2011, 2012.
  • [ACTI43] Perry N., Bernard A., Bosch-Mauchand M., Leduigou J., Xu Y., Economical and ecological cross evaluation. 9th Conférence Internationale de Modélisation, Optimisation et SIMulation, Bordeaux, France, June, 2012.
  • [ACTI44] Rouault F., Bruneau D., Sebastian P., Ekomy Ango S., Lopez J., Numerical modelling and experimental study of a box-section tube bundle thermal energy storage unit for free-cooling of buildings. 12th International Conference on Energy Storage, Lleida, Spain, 16-18 May, 2012.
  • [ACTI45] Nadeau J.P., Integración de restricciones de industrialización de piezas en materiales compuestos aplicado al proceso RTM, Apoyo para la toma de decisión en diseño preliminar. Congreso Internacional de Innovaciones en Plásticos CIIP, Toluca, Mexique, 20-23/09, Conférence invitée, 2012.
  • [ACTI46] Nadeau J.P., Diseño, modelación y optimización de un secador solar innovador con almacén de energía. Semana internacional de la agroindustria y de la innovación, Bucaramanga, Colombie, 30/10-02/11, Conférence invitée, 2012.
  • [ACTI47] Velázquez Romo E.E., Nadeau J.P., Selección de indicadores de sostenibilidad para el diseño preliminar de edificios de oficinas desde el punto de vista energético. II Symposium de Boursiers et Ex-Boursiers du Conseil National Mexicain des Sciences et de la Technologie (CONACyT), Strasbourg, France, 29-30 novembre, 2012.
  • [ACTI48] Princaud M., Pompidou S., Andriankaja H., Sonnemann G., Perry N., Making viable the recycling of carbon fiber/thermoset matrix composites: first elements of study. 6th International Conference on Life Cycle Management, Göteborg, Suède, 25-28 august, 2013.
  • [ACTI49] Ben Salem N., Jumel J., Budzik M.K., Shanahan M.E.R., Combined Experimental and Theoretical Analysis of the Mixed Mode Bending Test. 30th International Conference on Multiaxial Fatigue & Fracture, Kyoto, Japon, 3-6 juin, 2013.
  • [ACTI50] Clouet B., Pommier R., Danis M., New composite timbers, full field analysis of adhesive behavior. Composite Materials and Joining Technologies for Composites, New-York, Etats-Unis, 11-14 juin 2012, Vol. 7, pp. 51-58, DOI 10.1007/978-1-4614-4553-1_6, ISBN/ISSN 978-1-4614-4552-4, Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics. Conference Proceedings of the Society for Experimental Mechanics Series 44, Springer, 2013.
  • [ACTI51] Samet W., Ledoux Y., Nadeau J.P., Eco-innovative method to improve the distribution phase of product. In: Advanced Logistics and Transport (ICALT). International Conference on Advanced Logistics and Transport, Sousse, Tunisie, 29-31 May 2013, Ed. IEE, pp. 529-534, 2013.
  • [ACTI52] Grandjean J., Samper S., Ledoux Y., Billard R., Vacher P., Devun L., Gradel T., Characterization of the squeaking phenomenon for the total hip implants with High-speed cameras. 25èmes PhotoMechanics, Montpellier, France, 27 - 29 May 2013, 2013.
  • [ACTI53] Mesnard M., Ramos A., Towards a radically innovative TMJ prosthesis: from clinical needs to finite element analysis of technological concepts. 1st CIRP conference on biomanufacturing, Tokyo, Japon, 03-2013, Vol. 5, pp. 141-146, ISBN/ISSN 22128271 , 2013.
  • [ACTI54] Mesnard M., Durand M., Dispositifs Médicaux et Biomatériaux. 1ères Journées d'affaires Européennes des technologies et équipements médicaux / MED’INOV, Monaco, France, 03-2013, Conférence invitée, 2013.
  • [ACTI55] Lecomte J., Bois C., Wargnier H., Wahl J.C., Effect of geometric errors on the behaviour of multi-bolt composite joints. 19th International Conference on Composite Materials, Montréal, Canada, 28 July - 02 August, 2013.
  • [ACTI56] Homri L., Teissandier D., Ballu A., Tolerancing Analysis by Operations on Polytopes. In: Design and Modeling of Mechanical Systems. 5th International Conference Design and Modeling of Mechanical Systems, Djerba, Tunisie, March 25-27, pp. 597-604, ISBN/ISSN 9783642371424, 2013.
  • [ACTI57] Zhao Y.F., Perry N., Andriankaja H., Information structure for Manufacturing Sustainability Assessment: STEP for LCA. 6th International Conference on Life Cycle Management, Göteborg, Suède, 25-28 august, 2013.
  • [ACTI58] Rückert G., Perry N., Sire S., Marya S., Enhanced Weld Penetrations In GTA Welding with Activating Fluxes - Case studies: Aluminum, Plain Carbon & Stainless Steels And Titanium. International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS Processing, Fabrication, Properties, Applications, Las Vegas, Usa, December 2 – 6, Conférence invitée, 2013.
  • [ACTI59] Velázquez Romo E.E., Nadeau J.P., Bruneau D., Lagiere P., Sustainability indicators for the preliminary energy design of office buildings. iiSBE Forum of Young Researchers in Sustainable Building, Prague, République Tchèque, 25 juin, 2013.
  • [ACTI60] Ekomy Ango S., Bruneau D., Aregba W., Sebastian P., Sommier A., Rouault F., Caractérisations expérimentales et modélisation des performances d'échangeurs-stockeurs air-matériaux à changement de phase. Conférence Internationale ''Ecomatériaux de construction: Pilier de la croissance verte en Afrique?'', Ouagadougou, Burkina Faso, 10 - 12 Juin 2013, 2013.
  • [ACTI61] Ahmat T., Bruneau D., Aregba W., Solar dryinf of beef: Hygroscopic characterization of the product and modeling of the solar drying. 4th European Drying Conference, Paris, France, 2 - 4 octobre, 2013.
  • [ACTI62] Rodney E., Ledoux Y., Ducq Y., Breysse D., Integrating risks in project management. 16th International DSM Conference, Paris, France, 2-4 juillet, Poster, 2014.
  • [ACTI63] Breysse D., Rodney E., Marache A., Chaplain M., Statistical modeling of synthetic climates for applications on construction materials. 2nd International Conference on Vulnerability and Risk Analysis and Management & 6th International Symposium on Uncertainty Modelling and Analysis - ASCE-ICVRAM-ISUMA, Liverpool, Angleterre, 13-16 juillet, 2014.
  • [ACTI64] Baracchini P., Guillebaud C., Kromm F.X., Catapano A., Montemurro M., Wargnier H., Architecture and materials selection in multi-materials design. 16th European Conference on Composite Materials, Seville, Spain, 22-26 juin, 2014.
  • [ACTI65] Le Goff E., Bois C., Wargnier H., Wahl J.C., Investigation of an innovative repairing solution for composite hole. 16th European Conference on Composite Materials, Seville, Spain, 22-26 juin, 2014.
  • [ACTI66] Lecomte J., Bois C., Wargnier H., Wahl J.C., Influence of bearing degradation on the behaviour of multi-bolt composite joints with hole position error. 16th European Conference on Composite Materials, Seville, Spain, 22-26 juin, 2014.
  • [ACTI67] Wahl J.C., Bois C., Laeuffer H., Gillet A., Mechanical behavior and gas permeability of composites vessels. 4th International Carbon Composites Conference, Arcachon, France, 12-14 mai, 2014.
  • [ACTI68] Kromm F.X., Wargnier H., Danis M., Development of tools for multi-material design. Joint Conference on Mechanical, Design Engineering and Advanced Manufacturing, Toulouse, France, 18-20 juin 2014, 2014.
  • [ACTI69] Homri L., Teissandier D., Ballu A., Taking into account of unbounded displacements in tolerance analysis. 13th CIRP International Seminar on Computer Aided Tolerancing, Hangzhou, Chine, May 11-14, 2014.
  • [ACTI70] Catapano A., Montemurro M., Optimal design of sandwich plates with honeycomb core. Joint Conference on Mechanical, Design Engineering and Advanced Manufacturing, Toulouse, France, 18-20 juin 2014, 2014.
  • [ACTI71] Le Diagon Y., Perry N., Pompidou S., Integration of end-of-life options as a design criterion in methods and tools for ecodesign. Joint Conference on Mechanical, Design Engineering and Advanced Manufacturing, Toulouse, France, 18-20 juin 2014, 2014.
  • [ACTI72] Nadeau J.P., Diseño: Integración de restricciones vinculadas a la industrialización de piezas de materiales compuestos, Aplicado al proceso RTM. Virtual Concept International Workshop, Medellin, Colombie, 26-27 mars, Conférence invitée, 2014.
  • [ACTI73] Calle-Escobar M., Mejia-Gutierrez R., Nadeau J.P., Pailhes J., Methodology For The Implementation Of Heuristics In The Design Process. Virtual Concept International Workshop, Medellin, Colombie, 26-27 mars, ISBN/ISSN 9782954892702, 2014.
  • [ACTI74] Agudelo Guttierez L.M., Mejia-Gutierrez R., Nadeau J.P., Pailhes J., Environmental Uncertainty Fuzzy Analysis in Early Stages of the Design Process. Virtual Concept International Workshop, Medellin, Colombie, 26-27 mars, ISBN/ISSN 9782954892702, 2014.
  • [ACTI75] Agudelo Guttierez L.M., Mejia-Gutierrez R., Nadeau J.P., Pailhes J., Life cycle analysis in preliminary design stages. Joint Conference on Mechanical, Design Engineering and Advanced Manufacturing, Toulouse, France, 18-20 juin 2014, 2014.
  • [ACTI76] El Amine M., Pailhes J., Perry N., Comparison of different Multiple-criteria decision analysis methods in the context of conceptual design: application to the development of a solar collector structure. Joint Conference on Mechanical, Design Engineering and Advanced Manufacturing, Toulouse, France, 18-20 juin 2014, 2014.
  • [ACTI77] Rodríguez Esquivel J.C., Meneses Viveros A., Perry N., Gestures for interaction between the software CATIA and the human via Microsoft Kinect. 16th International Conference on Human-Computer Interaction, Heraklion, Grèce, June, 2014.
  • [ACTI78] El Moussaid M., Wahl J.C., Perry N., Bois C., Development of a micromechanical model in interaction with parameters related to the microstructure of carbon/epoxy composites. 16th European Conference on Composite Materials, Seville, Spain, 22-26 juin, 2014.
  • [ACTI79] Princaud M., Pompidou S., Perry N., Sonnemann G., Aymonier C., Loppinet-Serani A., The recycling of omc’s carbon reinforcement by solvolysing thermoset matrix: a way of sustainability for composites. 16th European Conference on Composite Materials, Seville, Spain, 22-26 juin, 2014.
  • [ACTI80] Ballu A., Mathieu L., Dantan J.Y., Formal Language for GeoSpelling. 13th CIRP International Seminar on Computer Aided Tolerancing, Hangzhou, Chine, May 11-14, 2014.

Communications avec actes dans un congrès National

  • [ACTN1] Herlin A., Breysse D., Ledoux Y., Cohen G., Trois approches complémentaires pour l’analyse des risques de projet. 29èmes Rencontre Universitaires de Génie Civil, Tlemcen, Algérie, 29-31 mai, 2011.
  • [ACTN2] Ghazali E., Bertran X., Denux D., Xu C., Pedros M., Lacoste E., Perry N., Elaboration de composites par cuisson rapide : modélisation numérique du couplage thermo-chimique. 17ème Journées Nationales sur les Composites, Poitiers, France, 15-17 juin, No. paper 160, 2011.
  • [ACTN3] Ghazali E., Xu C., Lacoste E., Perry N., Simulation numérique des couplages thermo-mécaniques induits par les procédés de cuisson rapide de composites. 20ème Congrès Français de Mécanique, Besançon, France, 28 août-2 septembre, No. paper 706, 2011.
  • [ACTN4] Guillebaud C., Touchard F., Chocinski L., Dever C., Caractérisation expérimentale et numérique de l’interface fil/matrice dans les composites chanvre/époxy. 17ème Journées Nationales sur les Composites, Poitiers, France, 15-17 juin, 2011.
  • [ACTN5] Bois C., Colt M., Wargnier H., Wahl J.C., Etude du transfert de charge dans les assemblages composites hybrides boulonnés et collés. 17ème Journées Nationales sur les Composites, Poitiers, France, 15-17 juin, 2011.
  • [ACTN6] Puel F., Morlier J., Mesnard M., Cid M., Hellard P., Three-dimensional kinematic and dynamic analyses of the crawl tumble turn performance: the expertise effect. In: Computer Methods in Biomechanics and Biomedical Engineering. 36ème Congrès de la Société de Biomécanique, Besançon, France, 31 août- 2 septembre, Ed. Taylor & Francis, Vol. 14, No. 1, pp. 215-216, ISBN/ISSN 10255842, 2011.
  • [ACTN7] Grandjean J., Ledoux Y., Samper S., Influence des défauts de forme dans les assemblages de surfaces planes. 20ème Congrès Français de Mécanique, Besançon, France, 28 août-2 septembre, 2011.
  • [ACTN8] Lê H.N., Ledoux Y., Darnis P., Ballu A., Évaluation expérimentale de l’enveloppe de la surface des écarts d’une liaison plane. 12ème Colloque National AIP PRIMECA, Mont Dore, France, 29 Mars - 1er avril, 2011.
  • [ACTN9] Pailhes J., Collignan A., Sebastian P., Quirante T., Modélisation et optimisation en conception multi-objectif. 20ème Congrès Français de Mécanique, Besançon, France, 28 août-2 septembre, 2011.
  • [ACTN10] Blanchard V., Perry N., Démarche d’enseignement de la CAO robuste basée sur l’analyse par graphe de systèmes mécaniques : retour d’expérience en DUT GMP. 12ème Colloque National AIP PRIMECA, Mont Dore, France, 29 Mars - 1er avril, 2011.
  • [ACTN11] Pilato A., Perry N., Wahl J.C., Bois C., Rôle du procédé d’enroulement filamentaire et de la polymérisation sur la résistance des réservoirs composite haute pression. 17ème Journées Nationales sur les Composites, Poitiers, France, 15-17 juin, 2011.
  • [ACTN12] Cazaurang G., Mazzolini J., Perry N., Questel J.H., Valette J., Analyse expérimentale de la relation procédé/propriétés dans la réalisation de pièces monolithiques épaisses carbone/kevlar par procédé LRI. 17ème Journées Nationales sur les Composites, Poitiers, France, 15-17 juin, 2011.
  • [ACTN13] Fadli T., Erriguible A., Subra-Paternault P., Simulation d'un procédé de cristallisation antisolvant en milieu fluide supercritique. 13ème Congrès de la Société Française de Génie des Procédés, Lille, France, 29/11-01/12, 2011.
  • [ACTN14] Ekomy Ango S., Bruneau D., Sebastian P., Caractérisation expérimentale des performances d'un échangeur stockeur à faisceau tubulaire air-matériaux à changement de phase. Congrès Français de Thermique, Perpignan, France, 24-27 mai, 2011.
  • [ACTN15] Martin T., Breysse D., Ledoux Y., Modélisation systémique des projets pour la maîtrise des risques, Structuration du modèle et application aux projets de Construction. Journées de la Fiabilité des Matériaux et des Structures, Chambéry, France, 4 - 6 juin, 2012.
  • [ACTN16] Princaud M., Pompidou S., Perry N., Mantaux O., Identification des bases d’une synergie entre recycleurs et concepteurs : application au cas des composites. 13ème Démarche et innovation dans la conception et la production des systèmes intégrés, Mont Dore, France, 27-30 mars, Ed. AIP Priméca, 2012.
  • [ACTN17] Pilato A., Perry N., Bois C., Wahl J.C., Démarche de conception d’un essai de caractérisation mécanique multi-instrumente : cas d'un test de mise sous pression d’anneau composite. 13ème Démarche et innovation dans la conception et la production des systèmes intégrés, Mont Dore, France, 27-30 mars, Ed. AIP Priméca, 2012.
  • [ACTN18] Arbaoui J.E., Malenfant J.C., Wahl J.C., Bois C., Étude expérimentale et modélisation de l’endommagement et de la perméabilité des matériaux composites destinés aux applications spatiales. ACMA 2012, Fés, Maroc, 09-12 mai, 2012.
  • [ACTN19] Monede-Hocquard L., Gille O., Mesnard M., Optimization of a new dynamic spinal device: Computer Methods in Biomechanics and Biomedical Engineering. 37ème Congrès de la Société de Biomécanique, Toulouse, France, 10-2012, Ed. Taylor & Francis, Vol. 15, No. 1, pp. 321-323, 2012.
  • [ACTN20] Ramos A., Mesnard M., Relvas C., Completo A., Simoes J., Numerical comparison of two implant fixations in TMJ: Computer Methods in Biomechanics and Biomedical Engineering. 37ème Congrès de la Société de Biomécanique, Toulouse, France, 10-2012, Ed. Taylor & Francis, Vol. 15, No. 1, pp. 324-325, 2012.
  • [ACTN21] Marques H., Ramos A., Mesnard M., Relvas C., Completo A., Simoes J., A numerical study on the influence of CT scan orientation for mandible biomechanics simulation; In: Computer Methods in Biomechanics and Biomedical Engineering. 37ème Congrès de la Société de Biomécanique, Toulouse, France, 10-2012, Ed. Taylor & Francis, Vol. 15, No. 1, pp. 72-73, ISBN/ISSN 10255842, 2012.
  • [ACTN22] Charpentier F., Ballu A., Pailhes J., Sensibilisation aux modèles géométriques utilisés en tolérancement. 13ème Colloque National AIP PRIMECA, Mont Dore, France, 27-30 mars, 2012.
  • [ACTN23] Rouault F., Bruneau D., Ekomy Ango S., Sebastian P., Nadeau J.P., Lopez J., Analyse expérimentale et modélisation d’un échangeur-stockeur contenant des matériaux à changement de phase. Congrès Français de Thermique- Thermique en conditions extrêmes, Bordeaux, France, 29 mai - 1er juin, 2012.
  • [ACTN24] Rouault F., Bruneau D., Sebastian P., Nadeau J.P., Lopez J., Etude numérique des performances d'un échangeur-stockeur utilisant des matériaux à changement de phase en fonction des paramètres de conception. Congrès Français de Thermique- Thermique en conditions extrêmes, Bordeaux, France, 29 mai - 1er juin, 2012.
  • [ACTN25] Lavalette A., Danis M., Pommier R., Elbez G., Cointe A., Delisée C., Analyse de l'influence des paramètres de collage d'un contreplaqué à l'état vert sur ses propriétés mécaniques. 21ème Congrès Français de Mécanique, Bordeaux, France, 26-30 août, 2013.
  • [ACTN26] Lavalette A., Elbez G., Pommier R., Danis M., Delisée C., Etude de la mouillabilité du bois par un adhésif polyuréthane : application au collage du pin maritime à l'état vert. 2èmes Journées Scientifiques du GDR Sciences du Bois, Champs sur Marne, France, 19-21 novembre, 2013.
  • [ACTN27] Cherif M., Bois C., Landon Y., Rôle des défauts de perçage sur le comportement en matage des composites stratifiés sous sollicitation de fatigue. AMAC Journée Scientifique et Technique Assemblage des structures composites, Bordeaux, France, 18/11/2013, Ed. AFM, 2013.
  • [ACTN28] Pompidou S., Princaud M., Andriankaja H., Sonnemann G., Perry N., Viabilisation du recyclage de composites à renfort carbone et matrice thermodurcissable. Premiers éléments d’étude. 21ème Congrès Français de Mécanique, Bordeaux, France, 26-30 août, 2013.
  • [ACTN29] Ramos A., Mesnard M., Relvas C., Completo A., Simoes J., Influência da geometria do parafuso na transferência de carga na prótese TMJ - Estudo numérico. 5° Congresso Nacional de Biomecânica, Espinho, Portugal, 02-2013, pp. 279-280, 2013.
  • [ACTN30] Duarte A., Ramos A., Mesnard M., Relvas C., Completo A., Simoes J., Estudo numérico da fixação de implante temporomandibular - Influência do número de parafusos. 5° Congresso Nacional de Biomecânica, Espinho, Portugal, 02-2013, pp. 311-312, 2013.
  • [ACTN31] Duarte A., Ramos A., Mesnard M., Marques H., Relvas C., Completo A., Simoes J., Desenvolvimento de um simulador da articulação temporomandibular. 5° Congresso Nacional de Biomecânica, Espinho, Portugal, 02-2013, pp. 275-276, 2013.
  • [ACTN32] Ramos A., Relvas C., Completo A., Simoes J., Mesnard M., The importance of the geometry of the screws in TMJ implant fixation: Computer Methods in Biomechanics and Biomedical Engineering. 38ème Congrès de la Société de Biomécanique, Marseille, France, 10-2013, Ed. Taylor & Francis, Vol. 16, No. 1, pp. 258-259, ISBN/ISSN 1025584, 2013.
  • [ACTN33] Duarte A., Ramos A., Mesnard M., Evaluation of a primary TMJ implant fixation using screws: a numerical study. In: Computer Methods in Biomechanics and Biomedical Engineering. 38ème Congrès de la Société de Biomécanique, Marseille, France, 10-2013, Ed. Taylor & Francis, Vol. 16, No. 1, pp. 242-243, ISBN/ISSN 10255842, 2013.
  • [ACTN34] Lecomte J., Bois C., Le Goff E., Wahl J.C., Wargnier H., Baustita A., Influence des défauts géométriques sur le comportement mécanique des assemblages de structures composites. 18ème Journées Nationales sur les Composites, Nantes, France, 12-14 Juin, Ed. RCMA, 2013.
  • [ACTN35] Wahl J.C., Bois C., Pilato A., Perry N., Lorriot T., Caractérisation des propriétés mécaniques des matériaux composites pour le dimensionnement de structures bobinées. 18ème Journées Nationales sur les Composites, Nantes, France, 12-14 Juin, Ed. RCMA, 2013.
  • [ACTN36] Lecomte J., Bois C., Wargnier H., Wahl J.C., Bautista Gomez A., Influence des défauts géométriques sur le comportement des assemblages boulonnés métal-composite. 21ème Congrès Français de Mécanique, Bordeaux, France, 26-30 août, 2013.
  • [ACTN37] El Moussaid M., Perry N., Wahl J.C., Bois C., Modèle de comportement des structures bobinées : étude des fonds. 21ème Congrès Français de Mécanique, Bordeaux, France, 26-30 août, 2013.
  • [ACTN38] Baracchini P., Kromm F.X., Guillebaud C., Wargnier H., Méthode de conception de matériaux architecturés: Application au packaging de l’électronique embarquée. 21ème Congrès Français de Mécanique, Bordeaux, France, 26-30 août, 2013.
  • [ACTN39] Homri L., Teissandier D., Ballu A., Introduction de demi-espaces «bouchons» pour borner les intersections d’ensembles de contraintes en tolérancement. 21ème Congrès Français de Mécanique, Bordeaux, France, 26-30 août, 2013.
  • [ACTN40] Ledoux Y., Samper S., Grandjean J., Analyse des assemblages avec défauts de forme des surfaces, approche théorique et expérimentale. 21ème Congrès Français de Mécanique, Bordeaux, France, 26-30 août, 2013.
  • [ACTN41] Samper S., Grandjean J., Ledoux Y., Devun L., Gradel T., Mesure du squeaking d’une Prothèse Totale de Hanche à l’aide d’un tribomètre pendulaire. 25ième Journées Internationales Francophones de Tribologie, Lyon, France, 29-31 mai 2013, 2013.
  • [ACTN42] El Amine M., Perry N., Pailhes J., Conception pilotée par la fabrication et l’industrialisation sous contrainte de couts : application à un un système réflecteur solaire et de son support. 21ème Congrès Français de Mécanique, Bordeaux, France, 26-30 août, 2013.
  • [ACTN43] Benama Y., Perry N., Alix T., Conception d'une unité de production mobile pour produit reconfigurable. 21ème Congrès Français de Mécanique, Bordeaux, France, 26-30 août, 2013.
  • [ACTN44] Rouault F., Román Bonachera A., Bruneau D., Sebastian P., Lopez J., Évaluation des performances et modélisation du comportement thermique d’un échangeur-stockeur pour le rafraîchissement de l’air. 21ème Congrès Français de Mécanique, Bordeaux, France, 26-30 août, 2013.
  • [ACTN45] Velázquez Romo E.E., Nadeau J.P., Bruneau D., Lagiere P., Indicateurs de durabilité pour la conception préliminaire de bureaux du point de vue énergétique. 21ème Congrès Français de Mécanique, Bordeaux, France, 26-30 août, 2013.
  • [ACTN46] Charpentier F., Pailhes J., Ballu A., Eléments de modélisation des systèmes en conception : vue tolérancement géométrique. 21ème Congrès Français de Mécanique, Bordeaux, France, 26-30 août, 2013.
  • [ACTN47] Rodney E., Khartabil F., Taillandier F., Hamzaoui F., Breysse D., Ducq Y., Ledoux Y., Apport de l'ingénierie des connaissances au management des risques de projets de construction. 32èmes Rencontre Universitaires de Génie Civil, Orléans, France, 4-6 juin, 2014.
  • [ACTN48] Clouet B., Pommier R., Mindeguia J.C., Danis M., Comportement mécanique d'un bois contrecollé à l'état vert lors de transferts hydriques : modélisation numérique et validation expérimentale. Journées thématiques sur les Techniques d'Imagerie pour la Caractérisation des Matériaux et Structures du Génie Civil, Clermont-Ferrand, France, 20-21 mars, 2014.
  • [ACTN49] Rodney E., El Amine M., Piegay N., Benama Y., Management de la complexité dans les projets d’innovation : application au développement d’un champ solaire à miroirs de Fresnel. XIXth Conference on Projectics, Bidard, France, 9-10 octobre, 2014.

COMmunications sans actes dans un congrès national ou international

  • [COM1] Princaud M., Pompidou S., Leray D., Perry N., Conception pilotée par le recyclage : application aux composites à renfort carbone et matrice thermodurcissable. 15èmes Journées STP du GdR MACS, Tarbes, France, 17-18 novembre 2011, 2011.
  • [COM2] Sefrioui N., Ahmadi-Senichault A., Bertin H., Omari A., Mise en évidence du facteur de retard dans la cinétique de dépôt colloïdal en milieux poreux. 21ième Congrès Général de la Société Française de Physique, Bordeaux, France, July 4-8, 2011.
  • [COM3] Teissandier D., Delos V., Homri L., Algorithme de calcul de la somme de Minkowski de polytopes : application à l'analyse de tolérances. Groupe de Recherche en Tolérancement, Saint Ouen, France, 5-6 Juin, 2012.
  • [COM4] Marya S., Perry N., Sire S., Marya M., Rückert G., Review and State of the Art in GTA Welding with Activating Fluxes. Int. Welding Symposium, Mumbai, India, Octobre, 2012.
  • [COM5] Jumel J., Shanahan M.E.R., Budzik M.K., Ben Salem N., Bresson G., Investigation of Adhesive and Cohesive Behaviour of Bonded Joints with Fracture Mechanics Tests. GDRE Meeting, Ultrasonic NDT of bonding, developments and links with mechanics and chemistry, Institut Langevin, Paris, France, Janury the 16th, 2013.
  • [COM6] Kromm F.X., Wargnier H., Multi-materials design methods. Filling Gaps in Materials Space: Methods and Applications, Paris, France, 14-15 octobre, 2013.
  • [COM7] Ballu A., Geometrical variability and functional quality of composite structures. Materias, Coimbra, France, 25-27/03, Conférence invitée, 2013.
  • [COM8] Homri L., Teissandier D., Ballu A., Fermeture des domaines facétisés par des demi-espaces «bouchons». Séminaire GRT, Groupe de Recherche en Tolérancement, Lyon, France, 12-13/6, 2013.

Chapitres d'Ouvrages Scientifiques

  • [COS1] Perry N., Bernard A., Bosch-Mauchand M., Leduigou J., Xu Y., Eco Global evaluation: cross benefits of economic and ecologic evaluation. In: Glocalized Solutions for Sustainability in Manufacturing. pp. 681-686, ISBN/ISSN 9783642191911, 2011.
  • [COS2] Leduigou J., Bernard A., Perry N., Delplace J.C., Application of PLM processes to respond to mechanical SMEs needs (Chap 31). In: CIRP Design book 2010. pp. 319-326, ISBN/ISSN 978364215972-5, 2011.
  • [COS3] Perry N., Mantaux O., Leray D., Lorriot T., Composite recycling: design for environment approach requirements. In: Recent Advances in Integrated Design and Manufacturing in Mechanical Engineering (Chap. GEDI) (Research in Interactive Design Vol 3). pp. 69, ISBN/ISSN 9782817801681, 2011.
  • [COS4] Fischer X., Nadeau J.P., Integrated Design and Manufacturing in Mechanical Engineering. In: Research in Interactive Design: Virtual, Interactive and Integrated Product Design and Manufacturing for Industrial Innovation. Ed. Springer, Vol. 3, pp. 7-43, DOI 10.1007/978-2-8178-0169-8_2, ISBN/ISSN 978-2-8178-0168-1, 2011.
  • [COS5] Fischer X., Nadeau J.P., Interactive Design: Then and Now. In: Research in Interactive Design: Virtual, Interactive and Integrated Product Design and Manufacturing for Industrial Innovation. Vol. 3, pp. 1-5, DOI 10.1007/978-2-8178-0169-8_1, ISBN/ISSN 978-2-8178-0168-1, 2011.
  • [COS6] Pompidou S., Princaud M., Perry N., Leray D., Recycling of carbon fiber. Identification of bases for a synergy between recyclers and designers. In: Volume 3: Advanced Composite Materials and Processing; Robotics; Information Management and PLM; Design Engineering (ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis). 11th ASME Engineering Systems Design and Analysis, Nantes, France, july 2-4, Vol. 3, pp. 551-559, ISBN/ISSN 978-0-7918-4486-1, 2012.
  • [COS7] Mesnard M., Ramos A., Chapter 3 - Biomechanical characterization and modeling of natural and alloplastic human temporomandibular joint. In: Technologies for Medical Sciences (Lecture Notes in Computational Vision and Biomechani). pp. 39-66, ISBN/ISSN 9400707258 , 2012.
  • [COS8] Xu Y., Bernard A., Perry N., Laroche F., Improvement of product design process by knowledge value analysis. In: CIRP Design 2012: Sustainable Product Development. 22nd CIRP Design Conference, Bangalore, India, March, pp. 207-216, DOI 10.1007/978-1-4471-4507-3, ISBN/ISSN 9781447145066, 2012.
  • [COS9] Grandjean J., Ledoux Y., Samper S., Favreliere H., Form Errors Impact in a Rotating Plane Surface Assembly. Ed. Procedia CIRP, Vol. 10, pp. 178-185, 2013.
  • [COS10] Jaubert J., Programme d'étude de la grotte de cussac : perspectives 2013–2015. 2013.
  • [COS11] Malmiry R.B., Perry N., Complexity Management in Product/Process Simultaneous Design for Implementing a Fresnel Thermodynamic Solar Plant. In: Smart Product Engineering: Proceedings of the 23rd CIRP Design Conference, Bochum, Germany, March 11th - 13th, 2013 (Lecture Notes in Production Engineering). 23th Cirp Design Conf, Bochum, Germany, March, Ed. Springer Berlin Heidelberg, pp. 411-420, DOI 10.1007/978-3-642-30817-8_40, ISBN/ISSN 9783642308161, 2013.
  • [COS12] Zao Y.F., Perry N., Andriankaja H., A Manufacturing Informatics Framework for Manufacturing Sustainability Assessment. In: Re-engineering Manufacturing for Sustainability: Proceedings of the 20th CIRP International Conference on Life Cycle Engineering, Singapore 17-19 April, 2013. 20th Cirp LifeCycle Engineering Conf, Singapore, Singapore, April, Ed. Springer Singapore, pp. 475-480, DOI 10.1007/978-981-4451-48-2_77, ISBN/ISSN 9789814451475, 2013.
  • [COS13] Zhao Y.F., Perry N., Andriankaja H., A Manufacturing Informatics Framework for Manufacturing Sustainability Assessment. In: Re-engineering Manufacturing for Sustainability. pp. 475-482, ISBN/ISSN 9789814451475, 2013.
  • [COS14] Malmiry R.B., Perry N., Complexity Management in Product/Process Simultaneous Design for Implementing a Fresnel Thermodynamic Solar Plant. In: Production Engineering - Smart Product Engineering. Ed. Spinger, pp. 411-420, ISBN/ISSN 9783642308178, 2013.
  • [COS15] Perry N., Pompidou S., Mantaux O., Gillet A., Composite Fiber Recovery: Integration into a Design for Recycling Approach (Chap. 14), in Technology and Manufacturing Process Selection: the Product Life Cycle Perspective. Ed. Springer, pp. 281-296, ISBN/ISSN 9781447155430, 2014. Sous presse.
  • [COS16] El Yagoubi J., Lamon J., Batsale J.C., Le Flem M., Damage induced evolution of the thermal diffusivity of SiC/SiC composite in Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems:Proceedings of the 2013 Annual Conference on Experimental and Applied Mechanics. Volume 8. (Conference Proceedings of the Society for Experimental Mechanics Series). Ed. Springer, pp. 187-197, DOI 10.1007/978-3-319-00876-9_23, ISBN/ISSN 978-3-319-00875-2, 2014.
  • [COS17] Sebastian P., Ledoux Y., Mechanics and Uncertainty. Ed. Maurice Lemaire; ISTE WILEY, pp. 101-124, ISBN/ISSN 9781848216297, 2014.
  • [COS18] Meteyer S., Xu X., Perry N., Zhao Y.F., Process Models and Sustainability Analysis of Binder-jetting Additive Manufacturing Processes. 21th Cirp LifeCycle Engineering Conf, Trondheim, Norway, June 2014, 2014.
  • [COS19] Perry N., Bernard A., Bosch-Mauchand M., Leduigou J., Xu Y., Proposal of an architectural solution for economic and environment global eco-cost assessment: models combination analysis (Chapter 12). In: Technology and Manufacturing Process Selection: the Product Life Cycle Perspective. ISBN/ISSN 9781447155430, 2014.
  • [COS20] Perry N., Bernard A., Knowledge Management. In: CIRP Encyclopedia of Production Engineering. Ed. Springer, ISBN/ISSN 9783642206160, 2014.
  • [COS21] El Amine M., Pailhes J., Perry N., Critical review of multi-criteria decision aid methods in conceptual design phases: application to the development of a solar collector structure. In: Proceedings of 24th CIRP Design Conference. 24th CIRP Design Conference, Milano, Italy, April 14th-16th, Ed. Elsevier, 2014.

Articles dans des revues Sans Comité de Lecture

  • [ASCL1] Mathieu L., Ballu A., La fiche GPS. Technologie, No. 184, pp. 22-29, 2013.

Autres Productions

  • [AP1] Massard T., Harry R., Sanial P., Lorriot T., Characterization of the equivalent unidirectional thin ply from NCF. JEC Composites Magazine, Vol. 68, 2011.
  • [AP2] Ballu A., Vincent R., Charpentier F., Choley J.Y., Mathieu L., ISO 22432: Geometrical product specifications (GPS) – Features utilized in specification and verification. Ed. ISO, 2011.
  • [AP3] Ballu A., Vincent R., Charpentier F., Choley J.Y., Mathieu L., ISO 25378: Geometrical product specifications (GPS) – Specification – Characteristics and conditions - Definitions. 2011.
  • [AP4] Vasconcellos D., Guillebaud C., Touchard F., Chocinski L., Static and fatigue damage mechanisms in woven hemp/epoxy composites. Russian-French Symposium on Composite Materials, Saint Petersburg, Russia, July 10-13, 2012.

Brevets

  • [BRVT1] Mesnard M., Ramos A., New concepts for a temporomandibular joint prosthesis - Prothèse condylienne pour une articulation temporo-mandibulaire. INPI n°2994077-A1 / Extension à l’étranger par voie internationale ''Patent Cooperation Treaty'' pour tout pays (08-2013)., 2012.
  • [BRVT2] Serin P., Lasseux D., Bois C., Malenfant J.C., Procédé d'étanchéification d’un réservoir en matériau composite. Brevet N° FR 2995656 / Titulaires: CNES, CNRS, ENSAM, Université Bordeaux I, IPB, 2014.