Articles dans des revues Internationales avec Comité de Lecture répertorié

  • [AICL1] Ranc N., Palin-Luc T., Paris P.C., Thermal effect of plastic dissipation at the crack tip on the stress intensity factor under cyclic loading. Engineering Fracture Mechanics, Vol. 78, pp. 961-972, DOI 10.1016/j.engfracmech.2010.11.010, 2011.
  • [AICL2] Duplessis Kergomard Y., Dau F., Iordanoff I., Implementation of a Discrete Element Method for the space-time modeling of loading in the caseof a soft shock: qualitative approach. International Journal of Computations and Modelling, Vol. 1, No. 2, pp. 39-72, 2011.
  • [AICL3] Palin-Luc T., Coupard D., Dumas C., Bristiel P., Simulation of multiaxial fatigue strength of steel component treated by surface induction hardening and comparison with experimental results. International Journal of Fatigue, Vol. 33, pp. 1040-1047, DOI 10.1016/j.ijfatigue.2011.02.004, 2011.
  • [AICL4] Saintier N., Awane T., Olive J.M., Matsuoka S., Murakami Y., Analyses of hydrogen distribution around fatigue crack on type 304 stainless steel using secondary ion mass spectrometry. International Journal of Hydrogen Energy, Vol. 36, No. 14, pp. 8630-8640, 2011.
  • [AICL5] Boukhoulda F.B., Guillaumat L., Lataillade J.L., Adda-Bedia E., Lousdad A., Aging-impact coupling based analysis upon glass/polyester composite material in hygrothermal environment. Materials and Design, Vol. 32, pp. 4080-4087, 2011.
  • [AICL6] Robert C., Saintier N., Palin-Luc T., Morel F., Etude numérique du comportement en fatigue à grand nombre de cycles d'agrégats polycristallins de cuivre. Mechanics and Industry, Vol. 12, No. 03, pp. 209-214, DOI 10.1051/meca/2011109, 2011.
  • [AICL7] Oborin V., Bannikov M., Naimark O., Froustey C., Long-Range-Correlation Large-Scale Interactions in Ensembles of Defects: Estimating Reliability of Aluminium Alloys under Dynamic Cycling and Fatigue Loading Conditions. Technical Physic Letters, Vol. 37, No. 3, pp. 241-243, DOI 10.1134/S106378501103009610.1134/S1063785011030096, 2011.
  • [AICL8] Orejon D., Sefiane K., Shanahan M.E.R., Stick-Slip of Evaporating Droplets: Substrate Hydrophobicity and Nanoparticle Concentration. Langmuir, Vol. 27, pp. 12834-12843, 2011.
  • [AICL9] Shanahan M.E.R., On the Behaviour of Dew Drops. Langmuir, Vol. 27, pp. 14919-14922, 2011.
  • [AICL10] Budzik M.K., Jumel J., Shanahan M.E.R., Process Zone in the Single Cantilever Beam Under Transverse Load: Part II: Experimental. Theoretical and Applied Fracture Mechanics, Vol. 56, pp. 13-21, 2011.
  • [AICL11] Jumel J., Budzik M.K., Shanahan M.E.R., Process Zone in the Single Cantilever Beam Under Transverse: Part I: Theoretical Analysis. Theoretical and Applied Fracture Mechanics, Vol. 65, pp. 7-12, 2011.
  • [AICL12] Jumel J., Budzik M.K., Shanahan M.E.R., Beam on Elastic Foundation with Anticlastic Curvature: Application to Analysis of Mode I Fracture Tests. Engineering Fracture Mechanics, Vol. 78, No. 18, pp. 3253-3269, 2011.
  • [AICL13] Budzik M.K., Jumel J., Shanahan M.E.R., An in situ Technique for the Assessment of Adhesive Properties of a Joint under Load. International Journal of Fracture, Vol. 171, No. 2, pp. 111-124, 2011.
  • [AICL14] Sefiane K., Shanahan M.E.R., Antoni M., Wetting and Phase Change: Opportunities and Challenges. Current Opinion in Colloid and Interface Science, Vol. 16, pp. 317-325, 2011.
  • [AICL15] Chauffaille S., Jumel J., Shanahan M.E.R., Elasto-Plastic Analysis of the Single Cantilever Beam Adhesion Test. Engineering Fracture Mechanics, Vol. 78, No. 13, pp. 2493-2504, 2011.
  • [AICL16] Radulovic J., Sefiane K., Shanahan M.E.R., Capillary Rise of Superspreaders. Journal of Colloid and Interface Science, Vol. 361, pp. 643-648, 2011.
  • [AICL17] Radulovic J., Sefiane K., Shanahan M.E.R., The Role of Diffusion in Superspreading. Journal of Adhesion Science and Technology, Vol. 25, pp. 1361-1370, 2011.
  • [AICL18] Shanahan M.E.R., Sefiane K., Moffat J.R., Dependence of Volatile Droplet Lifetime on the Hydrophobicity of the Substrate. Langmuir, Vol. 27, pp. 4572-4577, 2011.
  • [AICL19] Chauffaille S., Jumel J., Shanahan M.E.R., Pre-Cracking Behaviour in the Single Cantilever Beam Adhesion Test. International Journal of Fracture, Vol. 169, No. 2, pp. 133-144, 2011.
  • [AICL20] Chauffaille S., Jumel J., Shanahan M.E.R., Pre-Cracking Behaviour in the Single Cantilever Beam Adhesion Test. Erratum. International Journal of Fracture, Vol. 169, pp. 181, 2011.
  • [AICL21] Askounis A., Orejon D., Koutsos V., Sefiane K., Shanahan M.E.R., Nanoparticle deposits near the contact line of pinned volatile droplets: size and shape revealed by atomic force microscopy. Soft Matter, Vol. 7, pp. 4152-4155, 2011.
  • [AICL22] Budzik M.K., Jumel J., Shanahan M.E.R., Adhesive Compliance Effect in Mode I Separation: Profilometry Approach. International Journal of Adhesion and Adhesives, Vol. 31, No. 3, pp. 135-145, 2011.
  • [AICL23] Budzik M.K., Jumel J., Imielinska K., Shanahan M.E.R., Effect of Adhesive Compliance in the Assessment of Soft Adhesives with the Wedge Test. Journal of Adhesion Science and Technology, Vol. 25, pp. 131-149, 2011.
  • [AICL24] Jumel J., Budzik M.K., Chauffaille S., Shanahan M.E.R., Two Tests for Adhesive Bonding Long Term Characterization: Principles and Applications. Advances in Materials Science, Vol. 11, No. 2, pp. 44-55, 2011.
  • [AICL25] Budzik M.K., Jumel J., Shanahan M.E.R., Formation and Growth of the Crack in Bonded Joints under Mode I Fracture: Substrate Deflection at Crack Vicinity. Journal of Adhesion, Vol. 87, No. 10, pp. 967-988, 2011.
  • [AICL26] Dhondt M., Aubert I., Saintier N., Olive J.M., Intergranular stress corrosion cracking of friction stir welded nugget on a 2050 aluminum alloy. Advances in Materials Science, Vol. 11, No. 3, pp. 43-50, 2011.
  • [AICL27] Lamazouade-Tarek M., Aubert I., Jumel J., Oxidation and mechanical behaviour of iron based alloys and nickel based alloy for spring like interconnects of the PRODHYGE High Temperature Electrolyser. Defect Diffusion Forum, Vol. 312-315, pp. 806-811, 2011.
  • [AICL28] Maheo L., Rio G., Grolleau V., On the use of some numerical damping methods of spurious oscillations in the case of elastic wave propagation. Mechanics research communications, Vol. 38, No. 2, pp. 81-88, DOI dx.doi.org/10.1016/j.mechrescom.2011.01.006, 2011.
  • [AICL29] Bousquet E., Poulon-Quintin A., Puiggali M., Devos O., Touzet-Cortina M., Relationship between microstructure, microhardness and corrosion sensitivity of an AA 2024-T3 friction stir welded joint. Corrosion Science, Vol. 53, No. 9, pp. 3026-3034, DOI doi:10.1016/j.corsci.2011.05.049, 2011.
  • [AICL30] Sidane D., Devos O., Puiggali M., Tribollet B., Vivier V., Electrochemical characterization of a mechanically stressed passive layer. Electrochemistry Cpmmunications, Vol. 13, No. 12, pp. 1361-1364, DOI doi:10.1016/j.elecom.2011.08.010, 2011.
  • [AICL31] Nobial M., Devos O., Tribollet B., Electrochemical and in situ optical investigations of ZnO deposition. Journal of Crystal Growth, No. 327, pp. 173-181, 2011.
  • [AICL32] Guerard S., Chevalier Y., Moreschi H., Defontaine M., Callé S., Mitton D., Young’s modulus repeatability assessment using cycling compression loading on cancellous bone. Journal of Engineering in Medicine, Proceedings of the Institution of Mechanical Engineers, Part H, Vol. 225, No. 11, pp. 1117-1122, 2011.
  • [AICL33] Bergamini E., Pillet H., Hausselle J., Thoreux P., Guerard S., Camomilla V., Cappozzo A., Skalli W., Tibio-Femoral joint constraints for bone pose estimation using skin markers and multi-body optimization. Gait and Posture, Vol. 33, No. 4, pp. 706-711, 2011.
  • [AICL34] Moreschi H., Callé S., Guerard S., Mitton D., Renaud G., Defontaine M., Monitoring trabecular bone microdamage using a dynamic acousto-elastic testing method. Journal of Engineering in Medicine, Proceedings of the Institution of Mechanical Engineers, Part H, Vol. 225, No. 3, pp. 282-295, 2011.
  • [AICL35] Besnard G., Guerard S., Roux S., Hild F., A space-time approach in digital image correlation: Movie-DIC. Optics and Lasers in Engineering, Vol. 49, No. 1, pp. 71-81, 2011.
  • [AICL36] Mine Y., Olive J.M., Nagata K., Mitsutani T., Hydrogen effect on cyclic plasticity and crack growth in coarse-grained iron. Materials Science and Engineering A, Vol. 528, No. 28, pp. 8090-8099, 2011.
  • [AICL37] Viot P., Chirazi A., Dumon M., Bernard D., Fascio V., Ex-situ study of polymeric syntactic foams mechanical response under compression loading: effects of foam microstructure using microtomography techniques. Advanced materials research, Vol. 146-147, pp. 42-62, 2011.
  • [AICL38] Reglero Ruiz J.A., Viot P., Dumon M., Foaming of amorphous polymers and blends in supercritical CO2: solubility vs. block copolymers addition. Journal of cellular plastics, Vol. 47, No. 6, pp. 535-548, DOI doi:10.1177/0021955X11415925, 2011.
  • [AICL39] Reglero Ruiz J.A., Tallon J.M., Pedros M., Viot P., Dumon M., Two step microcellular foaming of amorphous polymers in scCO2. Journal of Supercritical Fluids, Vol. 57, No. 1, pp. 87-94, 2011.
  • [AICL40] Barou J.L., Viot P., Poisson P., Experimental Study of Mouth Guards Response Under Impact Loading. Applied Mechanics and Materials, Vol. 83, pp. 78-84, DOI 10.4028/www.scientific.net/AMM.83.78, 2011.
  • [AICL41] Viot P., Comportement des matériaux cellulaires sous sollicitations dynamiques. Partie 2 : approche multi échelle. Mechanics and Industry, Vol. 12, No. 4, pp. 247-264, 2011.
  • [AICL42] Ghorbel A., Saintier N., Dhiab A., Investigation of damage evolution in short glass fibers reinforced polyamide 6,6 under tensile loading using infrared thermography. Procedia Engineering, Vol. 10, pp. 2123-2128, 2011.
  • [AICL43] Ghorbel A., Saintier N., Dhiab A., Dammak F., Étude du comportement mécanique d’un polyamide 66 chargé de fibres de verre courtes. Mechanics and Industry, Vol. 12, No. 5, pp. 333-342, 2011.
  • [AICL44] Heimbs S., Van Den Broucke B., Duplessis Kergomard Y., Dau F., Malherbe B., Rubber Impact on 3D Textile Composites. Applied Composite Material, Vol. 19, No. 3-4, pp. 275-295, 2012.
  • [AICL45] Castaings M., Singh D., Viot P., Sizing of impact damages in composite materials using ultrasonic guided waves. NDT & E International, Vol. 6, pp. 22-31, Top 25 papers published in NDT & E Intern. in 2012, 2012.
  • [AICL46] Budzik M.K., Mascaro B., Jumel J., Castaings M., Shanahan M.E.R., Monitoring of Crosslinking of a DGEBA-PAMAM Adhesive in Composite/Aluminium Bonded Joint using Mechanical and Ultra-Sound Techniques. International Journal of Adhesion and Adhesives, Vol. 35, pp. 120-128, 2012.
  • [AICL47] Bresson G., Jumel J., Shanahan M.E.R., Serin P., Strength of Adhesively Bonded Joints under Mixed Axial & Shear Loading. International Journal of Adhesion and Adhesives, Vol. 35, pp. 27-35, 2012.
  • [AICL48] Mascaro B., Budzik M.K., Castaings M., Jumel J., Shanahan M.E.R., Evaluation of adhesive bond Young's modulus during crosslinking using a mechanical method and an ultrasound method. 10th Anglo-French Physical Acoustics Conference, Fréjus, France, January 19-21 2011,Journal of Physics: Conference Series, Vol. 353, No. 012006, pp. 1-9, DOI 10.1088/1742-6596/353/1/012006, 2012.
  • [AICL49] Bisu C.F., Zapciu M., Cahuc O., Gérard A., Anica M., Envelope dynamic analysis: a new approach for milling process. The International Journal of Advanced Manufacturing Technology, Vol. 62, No. 5-8, pp. 471-486, DOI 10.1007/s00170-011-3814-4, 2012.
  • [AICL50] André D., Iordanoff I., Charles J.L., Néauport J., Discrete element method to simulate continuous material by using the cohesive beam model. Ed. Elsivier, Computer Methods in Applied Mechanics and Engineering, Vol. 213-216, pp. 113-125, 2012.
  • [AICL51] Roest S., Baldwin K.A., Fairhurst D., Sefiane K., Shanahan M.E.R., Monolith formation and ring-stain suppression in low-pressure evaporation of poly(ethylene oxide) droplets. Journal of Fluid Mechanics, Vol. 695, pp. 321-329, 2012.
  • [AICL52] Budzik M.K., Jumel J., Shanahan M.E.R., Impact of interface heterogeneity on joint fracture. Journal of Adhesion, Vol. 88, No. 11-12, pp. 885-902, 2012.
  • [AICL53] Budzik M.K., Jumel J., Shanahan M.E.R., Antagonist adhesion effects due to variable substrate surface. Soft Matter, Vol. 8, No. 32, pp. 8321-8326, 2012.
  • [AICL54] Aubert I., Saintier N., Olive J.M., Crystal plasticity computation and atomic force microscopy analysis of the internal hydrogen-induced slip localization on polycrystalline stainless steel. Scripta Materialia, Vol. 66, No. 9, pp. 698-701, 2012.
  • [AICL55] Aubert I., Jumel J., Lamazouade-Tarek M., Vulliet J., Study of Iron-Based Alloys in Solid Oxide Fuel Cell Temperature and Atmosphere Conditions, Effect of a Silver-Coating. Solid State Phenomena, Vol. 183, pp. 9-16, 2012.
  • [AICL56] Ceglia G., Maheo L., Viot P., Bernard D., Chirazi A., Ly I., Mondain-Monval O., Schmitt V., Formulation and mechanical properties of emulsion-based model polymer foams. European Physical Journal E: Soft Matter and Biological Physics, Vol. 35, No. 4, pp. 31, DOI dx.doi.org/10.1140/epje/i2012-12031-0, 2012.
  • [AICL57] Maheo L., Grolleau V., Rio G., Numerical damping of spurious oscillations: a comparison between the bulk viscosity method and the explicit dissipative Tchamwa–Wielgosz scheme. Computational Mechanics, DOI dx.doi.org/10.1007/s00466-012-0708-8, 2012. Sous presse.
  • [AICL58] Robert C., Saintier N., Palin-Luc T., Morel F., Micro-mechanical modelling of high cycle fatigue behaviour of metals under multiaxial loads. Mechanics of Materials, Vol. 55, pp. 112-129, DOI 10.1016/j.mechmat.2012.08.006, 2012.
  • [AICL59] Bousquet E., Poulon-Quintin A., Devos O., Puiggali M., Touzet-Cortina M., Microstructure,mechanical and corrosion behaviour of an AA2024-T3 FSW joint. Advanced materials research, Vol. 409, pp. 257-262, 2012.
  • [AICL60] Ben Salem N., Budzik M.K., Jumel J., Shanahan M.E.R., Lavelle F., Investigation of the crack front process zone in the Double Cantilever Beam test with backface strain monitoring technique. Engineering Fracture Mechanics, 2012.
  • [AICL61] Kargulewicz M., Iordanoff I., Marrero V., Tichy J., Modeling of magnetorheological fluids by the discrete element method. ASME Journal of Tribology, Vol. 134, No. 3, 2012.
  • [AICL62] Budzik M.K., Jumel J., Shanahan M.E.R., On the Crack Front Curvature in Bonded Joints. Theoretical and Applied Fracture Mechanics, Vol. 59, No. 1, pp. 8-20, 2012.
  • [AICL63] Pineau P., Dau F., Subsampling and homogenization to investigate variability of composite material mechanical properties. Computer Methods in Applied Mechanics and Engineering, Vol. 241-244, pp. 238-245, 2012.
  • [AICL64] Córdoba-Torres P., Mesquita T.J., Devos O., Tribollet B., Roche V., Nogueira R.P., On the intrinsic coupling between constant-phase element parameters α and Q in electrochemical impedance spectroscopy. Electrochimica Acta, No. 72, pp. 172-178, 2012.
  • [AICL65] Lebailly F., Lima L., Clairemidi A., Aubert B., Guerard S., Chaïbi Y., De Guise J., Fontaine C., Skalli W., Semi-automated stereoradiographic upper limb 3D reconstructions using a combined parametric and statistical model: a preliminary study. Surgical and Radiologic Anatomy, Vol. 34, No. 8, pp. 757-765, 2012.
  • [AICL66] Grondin J., Grimal Q., Guerard S., Barkmann R., Glüer C.C., Laugier P., Circumferential cortical wave propagation at the proximal femur predicts bone strength. Journal of the Acoustical Society of America, Vol. 131, No. 4, pp. 3425, 2012.
  • [AICL67] Mine Y., Orita A., Murakami K., Olive J.M., Fatigue crack growth behaviour in austenitic stainless steels subjected to superficial and entire hydrogenation. Materials Science and Engineering A, Vol. 548, pp. 118-125, 2012.
  • [AICL68] Denneulin S., Viot P., Leonardi F., Lataillade J.L., The influence of acrylate triblock copolymer embedded in matrix on composite structures’ responses to low-velocity impacts. Composite Structures, Vol. 94, No. 4, pp. 1471-1481, 2012.
  • [AICL69] Gras L.L., Mitton D., Viot P., Laporte S., Hyper-viscoelastic properties of a human muscle in tension. Journal of the Mechanical Behavior of Biomedical Materials, Vol. 15, pp. 131-140, DOI 10.1016/j.jmbbm.2012.06.013, 2012.
  • [AICL70] Ramakrishnan K.R., Shankar K., Viot P., Guerard S., A Comparative Study of the Impact Properties of Sandwich Materials with Different Cores. EPJ Web of Conferences, Vol. 26, publication suite à la conférence DYMAT 2012 - 10th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, 2012.
  • [AICL71] Bresson G., Jumel J., Shanahan M.E.R., Serin P., Statistical Aspects of the Mechanical Behaviour of a Paste Adhesive. International Journal of Adhesion and Adhesives, Vol. 40, pp. 70-79, 2013.
  • [AICL72] Jumel J., Budzik M.K., Ben Salem N., Shanahan M.E.R., Instrumented End Notched Flexure - crack propagation and process zone monitoring Part I: Modeling and analysis. International Journal of Solids and Structures, Vol. 50, No. 2, pp. 297–309, 2013.
  • [AICL73] Budzik M.K., Jumel J., Ben Salem N., Shanahan M.E.R., Instrumented End Notched Flexure - crack propagation and process zone monitoring Part II: Data reduction and experimental. International Journal of Solids and Structures, Vol. 50, No. 2, pp. 310-319, 2013.
  • [AICL74] Budzik M.K., Jumel J., Shanahan M.E.R., 4-Point Beam Tensile Test on a Soft Adhesive. Materials and Design, Vol. 46, pp. 134-141, 2013.
  • [AICL75] Maheo L., Viot P., Bernard D., Chirazi A., Ceglia G., Schmitt V., Mondain-Monval O., Elastic behavior of multi-scale, open-cell foams. Composites Part B : Engineering, Vol. 44, No. 1, pp. 172-183, DOI dx.doi.org/10.1016/j.compositesb.2012.06.006, 2013.
  • [AICL76] Maheo L., Viot P., Impact on multi-layered polypropylene foams. International Journal of Impact Engineering, Vol. 53, pp. 84-93, DOI dx.doi.org/10.1016/j.ijimpeng.2012.03.011, 2013.
  • [AICL77] El May M., Palin-Luc T., Saintier N., Devos O., Effect of corrosion on the high cycle fatigue strength of a martensitic stainless steel X12CrNiMoV12-3. International Journal of Fatigue, Vol. 47, pp. 330–339, DOI 10.1016/j.ijfatigue.2012.09.018, 2013.
  • [AICL78] Saintier N., Palin-Luc T., Benabes J., Cocheteux F., Non local energy based fatigue life calculation method under multiaxial variable amplitude loadings. International Journal of Fatigue, Vol. 54, pp. 68-83, 2013.
  • [AICL79] Jebahi M., Charles J.L., Dau F., Iloul L., Iordanoff I., 3D coupling approach between discrete and continuum models for dynamic simulations (DEM–CNEM). Computer Methods in Applied Mechanics and Engineering, Vol. 255, pp. 196-209, DOI dx.doi.org/10.1016/j.cma.2012.11.021, 2013.
  • [AICL80] Terreros I., Iordanoff I., Charles J.L., Simulation of continuum heat conduction using DEM domains. Computational Material Science, Vol. 69, pp. 46-52, DOI 10.1016/j.commatsci.2012.11.021, 2013.
  • [AICL81] Ben Salem N., Bresson G., Jumel J., Shanahan M.E.R., Bellut S., Lavelle F., Weibull Analysis of Stiffness and Strength in Bulk Epoxy Adhesives Reinforced with Particles. Journal of Adhesion Science and Technology, Vol. 27, No. 21, pp. 2278-2295, 2013.
  • [AICL82] Mouanga M., Puiggali M., Tribollet B., Vivier V., Devos O., Galvanic corrosion between zinc and carbon steel investigated by local impedance spectroscopy. Electrochimica Acta, Vol. 88, pp. 6-14, 2013.
  • [AICL83] Rublon P., Huneau B., Saintier N., Beurrot S., Leygue A., Verron E., Mocuta C., Thiaudière D., Berghezan D., In situ synchrotron wide-angle X-ray diffraction investigation of fatigue cracks in natural rubber. 20(Pt 1):105-9 (2013). Journal of Synchrotron Radiattion, Vol. 20, No. 1, pp. 105-9, 2013.
  • [AICL84] Bois C., Wargnier H., Wahl J.C., Le Goff E., An analytical model for the strength prediction of hybrid (bolted/bonded) composite joints. Composite Structures, Vol. 97, pp. 252–260, 2013.
  • [AICL85] Jumel J., Chauffaille S., Budzik M.K., Shanahan M.E.R., Guitard J., Viscoelastic Foundation Analysis of Single Cantilevered Beam (SCB) Test Under Stationary Loading. European Journal of Mechanics A: Solids, Vol. 39, pp. 170-179, 2013.
  • [AICL86] Ben Salem N., Budzik M.K., Jumel J., Shanahan M.E.R., Lavelle F., Investigation of the Crack Front Process Zone in the Double Cantilever Beam Test with Backface Strain Monitoring Technique. Engineering Fracture Mechanics, Vol. 98, pp. 272-283, 2013.
  • [AICL87] Askounis A., Sefiane K., Koutsos V., Shanahan M.E.R., Structural transitions at a ring-stain created at the contact line of evaporating nano-suspension sessile drops. Physical Review E, Vol. 87, No. 012301, pp. 1-8, 2013.
  • [AICL88] Chen L., Bonaccurso E., Shanahan M.E.R., Inertial to Viscoelastic Transition in Early Drop Spreading on Soft Surfaces. Langmuir, Vol. 29, No. 6, pp. 1893-1898, 2013.
  • [AICL89] Orejon D., Sefiane K., Shanahan M.E.R., Young-Lippmann equation revisited for nano-suspensions. Applied Physics Letters, Vol. 102, No. 201601, pp. 1-3, 2013.
  • [AICL90] Orejon D., Sefiane K., Shanahan M.E.R., Evaporation of Nanofluid Droplets with Applied DC Potential. Journal of Colloid and Interface Science, Vol. 407, pp. 29-38, 2013.
  • [AICL91] Ambriz R., Froustey C., Mesmacque G., Determination of the tensile behavior at middle strain rate of AA6061-T6 aluminum alloy welds. International Journal of Impact Engineering, Vol. 60, pp. 107 - 119, DOI dx.doi.org/10.1016/j.ijimpeng.2013.04.006, ISBN/ISSN 0734-743X, 2013.
  • [AICL92] Jebahi M., André D., Dau F., Charles J.L., Iordanoff I., Simulation of Vickers indentation of silica glass. Journal of Non-Crystalline Solids, Vol. 378, No. 0, pp. 15 - 24, DOI dx.doi.org/10.1016/j.jnoncrysol.2013.06.007, ISSN 0022-3093, 2013.
  • [AICL93] André D., Jebahi M., Iordanoff I., Charles J.L., Néauport J., Using the discrete element method to simulate brittle fracture in the indentation of a silica glass with a blunt indenter. Computer Methods in Applied Mechanics and Engineering, Vol. 256, No. 1, pp. 136-147, DOI 10.1016/j.cma.2013.06.008D, 2013.
  • [AICL94] Battaglia J.L., Schick V., Rossignol C., Kusiak A., Aubert I., Lamperti A., Wiemer C., Thermal resistance at Al-Ge2Sb2Te5 interface. Applied Physics Letters, Vol. 102, No. 18, DOI DOI: 10.1063/1.4803923, Article number 181907, 2013.
  • [AICL95] Perry N., Wahl J.C., Bois C., Pilato A., Bernard A., Thick composite design for hydrogen vessels: a contribution to composite design method. Ed. Elseiver, CIRP Annals - Manufacturing Technologies, Vol. 62, No. 1, pp. 139–142, 2013.
  • [AICL96] Errotabehere X., Bois C., Dumon M., Le Houérou V., Gauthier C., Experimental and numerical analysis of the blistering of a polymeric coating during scratching process. Progress in Organic Coatings, 2013. Soumis pour publication.
  • [AICL97] Bois C., Pilato A., Wahl J.C., Perry N., Proposal for a smart pressurized ring test to study thick composite produced by filament winding. Ed. Elseiver, Composites Part B : Engineering, Vol. 53, pp. 382–390, DOI dx.doi.org/10.1016/j.compositesb.2013.06.001, 2013.
  • [AICL98] Mouanga M., Puiggali M., Devos O., EIS and LEIS investigation of ageing low carbon steel with Zn-Ni coating. Electrochimica Acta, Vol. 106, pp. 82-90, 2013.
  • [AICL99] Grimal Q., Grondin J., Guerard S., Barkmann R., Engelke K., Glüer C.C., Laugier P., Quantitative ultrasound of cortical bone in the femoral neck predicts femur strength : results of a pilot study. Journal of Bone and Mineral Research, Vol. 38, No. 2, pp. 302-312, 2013.
  • [AICL100] Goupil A., Iordanoff I., Charles J.L., Rinchet A., Modelling of polishing tools for high spatial frequency defect correction on aspherical surfaces. Ed. Ricardo Alves de Sousa and Robertt Valente, Key Engineering Materials, Vol. 554-557, pp. 1232-1241, DOI 10.4028/www.scientific.net/KEM.554-557.1232, 2013.
  • [AICL101] Pruliere E., Chinesta F., Ammar A., Leygue A., Poitou A., On the solution of the heat equation in very thin tapes. International Journal of Thermal Sciences, Vol. 65, pp. 148-157, 2013.
  • [AICL102] Budzik M.K., Jumel J., Shanahan M.E.R., Adhesive Fracture of Heterogeneous Interfaces. Philosophical Magazine, Vol. 93, No. 19, pp. 2413-2427, 2013.
  • [AICL103] Vaquette C., Viateau V., Guerard S., Anagnostou F., Manassero M., Castner D., Migonney V., The effect of polystyrene sodium sulfonate grafting on polyethylene terephthalate artificial ligaments on in vitro mineralisation and in vivo bone tissue integration. Biomaterials, 2013.
  • [AICL104] Viateau V., Manassero M., Anagnostou F., Guerard S., Mitton D., Migonney V., Biological and Biomechanical Evaluation of the Ligament Advanced Reinforcement System (LARS AC) in a Sheep Model of Anterior Cruciate Ligament Replacement: A 3-Month and 12-Month Study. Arthroscopy: The Journal of Arthroscopy & Related Surgery, Vol. 29, No. 6, pp. 1079-1088, 2013.
  • [AICL105] Karolczuk A., Palin-Luc T., Modelling of stress gradient effect on fatigue life using Weibull based distribution function. Journal of Theoretical and Applied Mechanics, Vol. 51, No. 2, pp. 297-311, ISSN 0079-3701, 2013.
  • [AICL106] Askounis A., Sefiane K., Koutsos V., Shanahan M.E.R., The effect of evaporation kinetics on nanoparticle structuring within contact line deposits of volatile drops. Colloids and Surfaces A: Physiochemical and Engineering Aspects, Vol. 441, pp. 855-866, 2014.
  • [AICL107] Budzik M.K., Jumel J., Shanahan M.E.R., Experimental investigation of mesoscale crack front triple line. Applied Physics A: Materials Science & Processing Materials Science & Processing, Vol. 114, pp. 495-501, 2014.
  • [AICL108] Ranc N., Palin-Luc T., Paris P.C., Saintier N., About the effect of plastic dissipation in heat at the crack tip on the stress intensity factor under cyclic loading. International Journal of Fatigue, Vol. 58, pp. 56 - 64, DOI 10.1016/j.ijfatigue.2013.04.012, 2014.
  • [AICL109] Sidane D., Devos O., Puiggali M., Touzet-Cortina M., Larivière J.P., Guitard J., Investigation of the surface reactivity on a 304L tensile notched specimen using scanning electrochemical microscopy. Corrosion Science, 2014. Sous presse.
  • [AICL110] Budzik M.K., Jumel J., Ben Salem N., Shanahan M.E.R., Comparison of Cyclic and Monotonic Loading of a Double Cantilever Beam Adhesion Test. Journal of Adhesion, Vol. 90, No. 3, pp. 252-267, 2014.
  • [AICL111] Marechal D., Saintier N., Palin-Luc T., Nadal F., High-Cycle Fatigue Behaviour of Pure Tantalum under Multiaxial and Variable Amplitude Loadings. Advanced materials research, Vol. 891-892, pp. 1341-1346, DOI 10.4028/www.scientific.net/AMR.891-892.1341, 2014.
  • [AICL112] Teus S., Mazanko V., Gavriljuk V., Olive J.M., Grain boundary migration of substitutional and interstitial atoms in α-iron. Acta Materialia, Vol. 69, pp. 105-113, DOI dx.doi.org/10.1016/j.actamat.2014.01.049, 2014.
  • [AICL113] Ilin D., Saintier N., Olive J.M., Abgrall R., Aubert I., Simulation of hydrogen diffusion affected by stress-strain heterogeneity in polycrystalline stainless steel. International Journal of Hydrogen Energy, Vol. 39, No. 5, pp. 2418-2411, DOI dx.doi.org/10.1016/j.ijhydene.2013.11.065, 2014.
  • [AICL114] Shanahan M.E.R., Sefiane K., Recalcitrant Bubbles. Nature, Scientific Reports, Vol. 4, pp. 4727, DOI 10.1038/srep04727, 2014.
  • [AICL115] André D., Charles J.L., Iordanoff I., Néauport J., The GranOO workbench, a new tool for developing discrete element simulations, and its application to tribological problems. Ed. Elsevier, Advances in Engineering Software, Vol. 74, pp. 40-48, 2014.
  • [AICL116] Matadi Boumbimba R., Froustey C., Viot P., Olive J.M., Leonardi F., Gerard P., Inoubli R., Preparation and mechanical characterisation of laminate composites made of glass fibre/epoxy resin filled with tri bloc copolymers. Composite Structures, 2014. Sous presse.
  • [AICL117] Ramakrishnan K.R., Guerard S., Viot P., Shankar K., Effect of block copolymer nano-reinforcements on the low velocity impact response of sandwich structures. Composite Structures, Vol. 110, pp. 174-182, 2014.
  • [AICL118] Haupert S., Guerard S., Peyrin F., Mitton D., Laugier P., Non-destructive characterization of cortical bone micro-damage by Nonlinear Resonant Ultrasound Spectroscopy. PLos ONE, DOI doi:10.1371/journal.pone.0083599, 2014.
  • [AICL119] Hor A., Saintier N., Robert C., Palin-Luc T., Morel F., Statistical assessment of multiaxial HCF criteria at the grain scale. International Journal of Fatigue, Vol. 67, pp. 151-158, 2014.
  • [AICL120] Metoui S., Pruliere E., Ammar A., Dau F., Iordanoff I., The proper generalized decomposition for the simulation of delamination using cohesive zone model. International Journal for Numerical Methods in Engineering, Vol. 99, No. 13, pp. 1000-1022, 2014.
  • [AICL121] Pruliere E., 3D simulation of laminated shell structures using the Proper Generalized Decomposition. Composite Structures, Vol. 117, pp. 373-381, 2014.
  • [AICL122] Kopp J.B., Lin J., Schmittbuhl J., Fond C., Longitudinal dynamic fracture of polymer pipes. European Journal of Environmental and Civil Engineering, DOI 10.1080/19648189.2013.878257, 2014. Sous presse.
  • [AICL123] Kopp J.B., Schmittbuhl J., Noel O., Lin J., Fond C., Fluctuations of the dynamic fracture energy values related to the amount of created fracture surface. Engineering Fracture Mechanics, Vol. 126, pp. 178-189, 2014.

Articles dans des revues Nationales avec Comité de Lecture répertorié

  • [ANCL1] Guillaumat L., Dau F., Cocheteux F., Chauvin T., Reliability approach on impacted composite material for railways. Revue des Composites et des Matériaux Avancés, 2011.
  • [ANCL2] Pineau N., Dau F., Non periodic homogenization and subsampling on heterogeneous media applied to generate statistical distribution of composite elastic properties at micro and mesoscale. Revue des Composites et des Matériaux Avancés, 2011.
  • [ANCL3] Moreschi H., Callé S., Guerard S., Mitton D., Defontaine M., Détection du micro-endommagement dans l’os trabéculaire à l’aide d’une méthode d’acousto-élasticité dynamique. Ingénierie et Recherche Biomédicale, Vol. 32, No. 5, pp. 269-273, 2011.
  • [ANCL4] Viateau V., Zhou J., Guerard S., Manassero M., Thourot M., Anagnostou F., Mitton D., Brulez B., Migonney V., LIGART : Ligament synthétique « bioactif » et « biointégrable » permettant la réhabilitation rapide du patient: greffage chimique, évaluations biologiques in vivo, expérimentation animale, étude préclinique. Ingénierie et Recherche Biomédicale, Vol. 32, No. 2, pp. 118-122, 2011.
  • [ANCL5] Saintier N., Palin-Luc T., Bidouard H., El Dsoki C., Kaufmann H., Dumas C., Völlmecke F.J., Sonsino C.M., Overload effects on a ferritic-bainitic steel and a cast aluminium alloy: two very different behaviours. Materialwissenschaft und Werkstofftechnik- Materials Science and Engineering Technology, Vol. 42, No. 10, pp. 845-854, 2011.
  • [ANCL6] Dau F., Duplessis Kergomard Y., Etude des endommagements dans des composites tissés Interlock 3X lors d'un choc basse vitesse avec un impacteur caoutchouc. Matériaux et Techniques, Vol. 100, No. 6-7, pp. 691-701, 2012.
  • [ANCL7] Dau F., Guillaumat L., Cocheteux F., Chauvin T., Reliability approach on impacted composite material for railways. Revue des Composites et des Matériaux Avancés, Vol. 22, No. 1, pp. 91-114, 2012.
  • [ANCL8] Denneulin S., Viot P., Leonardi F., Lataillade J.L., The influence of nanoparticles embedded in a matrix on the responses of composite structures to low velocity impacts. Revue des Composites et des Matériaux Avancés, Vol. 22, No. 1, pp. 47-66, DOI 10.3166/rcma.22.47-66 , 2012.
  • [ANCL9] Saillard J., Vulliet J., Autissier D., Blein F., Aubert I., Production massive et génération d’hydrogène à la demande. chocs, No. 43, pp. 37-46, 2014.

Articles dans des revues avec Comité de Lecture Non répertorié dans les bases de données internationales

  • [ACLN1] Viot P., Maheo L., Mercier A., Behaviour of polymeric multiscale foam under dynamic loading - Study of the influence of the density and the walls of beads. International Journal of Research and Reviews in Applied Sciences, Vol. 7, No. 1, pp. 1-19, 2011.

Communications avec actes dans un congrès International

  • [ACTI1] Denneulin S., Viot P., Dynamic Tensile Properties of 6061-T6 Aluminum Alloy Welds Obtained by Modified Indirect Electric Arc. 3rd International Conference on Impact Loading of Lightweight Structures, Valenciennes, France, June 28- July 01, 2011.
  • [ACTI2] Aubert I., Jumel J., Lamazouade-Tarek M., Study of iron based alloys and nickel based alloy in solid oxide fuel cells temperature and atmosphere conditions. Int. Conf. on Environmental Degradation of Engineering Materials & on Material Engineering and Technologies, Gdansk, Pologne, 16-18 mai 2011, Conférence invitée, 2011.
  • [ACTI3] Olive J.M., Miresmaeili R., Saintier N., Aubert I., Kanayama H., Simulation of the effect of heterogeneous stress field and microstructure of hydrogen diffusion. Int. Conf. on Environmental Degradation of Engineering Materials & on Material Engineering and Technologies, Gdansk, Pologne, 16-18 mai 2011, Conférence invitée, 2011.
  • [ACTI4] Agbessi K., Saintier N., Palin-Luc T., Activated slip systems in copper polycrystal under multiaxial fatigue loadings. 3rd International Conference on Heterogeneous Materials Mechanics, Shanghaï, CHINA, May 22-26, 2011.
  • [ACTI5] Bousquet E., Devos O., Poulon-Quintin A., Puiggali M., Touzet-Cortina M., Mechanical and corrosion behaviours of two dissimilar FSW joints: 2024 T3/7449 T79 and 2050 T8/7449 T79. 16 th International Conference & Exhibition on the Joining of Materials, Tisvildeleje, Denmark, May 10-13, 2011.
  • [ACTI6] Bousquet E., Puiggali M., Poulon-Quintin A., Devos O., Touzet-Cortina M., Microstructure, mechanical and corrosion behaviour of an AA2024-T3 FSW joint. International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS, Quebec, Canada, August 1-5, 2011.
  • [ACTI7] Dhondt M., Aubert I., Saintier N., Olive J.M., Intergranular stress corrosion cracking of friction stir welded nugget of aluminium alloy 2050. Int. Conf. on Environmental Degradation of Engineering Materials & on Material Engineering and Technologies, Gdansk, Pologne, 16-18 mai 2011, 2011.
  • [ACTI8] Wahl J.C., Malenfant J.C., Bois C., Danis M., Lasseux D., Pailhes J., Influence of thermomechanical loading on composite material permeability: application to the design of a linerless cryogenic tank. 3rd International Conference on Carbon Composites, Arcachon, France, 25-27 october, 2011.
  • [ACTI9] Dau F., Duplessis Kergomard Y., Damage mechanisms in interlock 3X woven composites under low velocity soft impact loading. 26th Annual Technical Conference/2nd Joint US-Canada Conference on Composites,, Montréal, Quebec/ Canada, September 26-28, 2011.
  • [ACTI10] Grondin J., Grimal Q., Guerard S., Barkmann R., Glüer C.C., Laugier P., Circumferential waves guided by the femur cortical shell can be used to predict femur strength: in vitro evidence. IEEE International Ultrasonics Symposium 2011, Caribe Royale, Orlando, Florida, October 18-21, 2011.
  • [ACTI11] Haupert S., Guerard S., Mitton D., Peyrin F., Laugier P., Nonlinear ultrasound monitoring of fatigue microdamage accumulation in cortical bone. IEEE International Ultrasonics Symposium 2011, Caribe Royale, Orlando, Florida, October 18-21, 2011.
  • [ACTI12] Pattofatto S., Guerard S., Fortineau V., Laporte S., Failure and Mechanical Behavior of the Femur - Anterior Cruciate Ligament - Tibia Complex. Effect of the velocity. 23rd Congress of International Society of Biomechanics, Brussels, Belgium, July 3-7, 2011.
  • [ACTI13] Laporte S., Guerard S., Fortineau V., Pattofatto S., Mechanical behaviour of rabbit anterior cruciate ligament under dynamic loading. 3rd International Conference on Impact Loading of Lightweight Structures, Valenciennes, France, June 28- July 01, 2011.
  • [ACTI14] Haupert S., Guerard S., Johnson P.A., Mitton D., Laugier P., Characterisation of cortical bone microdamage by nonlinear resonant ultrasound. 23rd Congress of International Society of Biomechanics, Brussels, Belgium, July 3-7, 2011.
  • [ACTI15] Guerard S., Chevalier Y., Moreschi H., Defontaine M., Callé S., Mitton D., Young’s modulus repeatability assessment using cycling compression loading on cancellous bone. 23rd Congress of International Society of Biomechanics, Brussels, Belgium, July 3-7, 2011.
  • [ACTI16] Guerard S., Barbier O., Gréco G., Migonney V., Boisrenoult P., Thoreux P., A comparison of four fixation configurations in anterior cruciate ligament reconstruction using a new generation of artificial ligament. 23rd Congress of International Society of Biomechanics, Brussels, Belgium, July 3-7, 2011.
  • [ACTI17] Haupert S., Guerard S., Johnson P.A., Mitton D., Laugier P., Nonlinear ultrasound monitoring of four-point bending fatigue induced micro-damage. 4th European Symposium on Utrasonic Characterisation of Bone, Jyväskylä, Finland, June 19-21, 2011.
  • [ACTI18] Haupert S., Guerard S., Johnson P.A., Mitton D., Laugier P., Nonlinear ultrasound monitoring of fatigue micro-damage accumulation in cortical bone. Sixteenth International Conference on Nonlinear Elasticity, Prague, Czech Republic, June 5-11, 2011.
  • [ACTI19] Grondin J., Grimal Q., Guerard S., Barkmann R., Glüer C.C., In vitro evidence that the circumferential wave guided by the femur cortical shell can be used to predict femur strength. 4th European Symposium on Utrasonic Characterisation of Bone, Jyväskylä, Finland, June 19-21, 2011.
  • [ACTI20] Perez-Mora R., Palin-Luc T., Bathias C., Dominguez G., Paris P.C., Arana J.L., Drastic effect of sea water corrosion on the very haigh cycle fatigue strength of a high strength steel. Fifth International Conference on Very High Cycle Fatigue, Berlin, Germany, June 28-30, pp. 6, 2011.
  • [ACTI21] Saintier N., Robert C., Morel F., Palin-Luc T., Multiaxial fatigue life criteria and microstructure modeling of metals. 3rd International Conference on Heterogeneous Materials Mechanics, Shanghaï, CHINA, May 22-26, 2011.
  • [ACTI22] Saintier N., Palin-Luc T., High Cycle Multiaxial fatigue strength criteria and microstructurally related modeling of metals. Advanced Problems of Mechanics and Physics of Mesoscopic Systems, Perm, Russia, February 1-4, Conférence invitée, 2011.
  • [ACTI23] Denneulin S., Viot P., Leonardi F., Lataillade J.L., Influence of Nanoparticles embedded in Matrix on Composite Structure Response to a Low Velocity Impact. 16th Intenational Conference on Composite Structure, Porto, Portugal, June 28-30, 2011.
  • [ACTI24] Viot P., Denneulin S., Leonardi F., Lataillade J.L., Influence of Nanoparticles embedded in Matrix on Composite Structure Response to a Low Velocity Impact. 3rd International Conference on Impact Loading of Lightweight Structures, Valenciennes, France, June 28- July 01, 2011.
  • [ACTI25] Maheo L., Viot P., Impact of graded polypropylene foams. 3rd International Conference on Impact Loading of Lightweight Structures, Valenciennes, France, June 28- July 01, 2011.
  • [ACTI26] Askounis A., Orejon D., Koutsos V., Sefiane K., Shanahan M.E.R., Nanoparticle deposits near the contact line of pinned volatile droplets: Size and shape revealed by atomic force microscopy. UK Scanning Probe Microscopy, Edimbourg, Ecosse, June 22-23, 2011.
  • [ACTI27] Saintier N., Microstructurally related high cycle fatigue strength modeling of metals. 3rd International Conference on Heterogeneous Materials Mechanics, Shanghaï, CHINA, May 22-26, Conférence invitée, 2011.
  • [ACTI28] Saintier N., Palin-Luc T., Taking into account microstructures in fatigue life criteria. Advanced Problems of Mechanics and Physics of Mesoscopic Systems, Perm, Russia, February 1-4, Conférence invitée, 2011.
  • [ACTI29] André D., Iordanoff I., Charles J.L., Néauport J., A quantitative discrete element model to investigate sub-surface damage due to surface polishing. 11th ASME Engineering Systems Design and Analysis, Nantes, France, july 2-4, 2012.
  • [ACTI30] André D., Iordanoff I., Charles J.L., Néauport J., Modélisation par éléments discrets des phases de doucissage de la silice. 24èmes Journées Internationales Francophones de Tribologie, Aix en Provence, France, 9-11 mai, 2012.
  • [ACTI31] André D., Iordanoff I., Charles J.L., Discrete element method to simulate brittle elastic material by using the cohesive beam model. 6th European Congress on Computational Methods in Applied Sciences and Engineering, Vienna, Austria, september 10-14, 2012.
  • [ACTI32] Terreros I., Iordanoff I., Charles J.L., Discrete element simulation of damageable elastoplastic materials. 6th European Congress on Computational Methods in Applied Sciences and Engineering, Vienna, Austria, september 10-14, 2012.
  • [ACTI33] Jebahi M., Charles J.L., Dau F., Iloul L., Iordanoff I., On the H1 discrete - continuum coupling based on the Arlequin method (DEM-CNEM). 6th European Congress on Computational Methods in Applied Sciences and Engineering, Vienna, Austria, september 10-14, pp. 7685-7697, ISBN/ISSN 978-395035370-9, 2012.
  • [ACTI34] Ben Salem N., Jumel J., Budzik M.K., Shanahan M.E.R., Backface strain monitoring of DCB and ENF tests. Euradh '12, 9th European Adhesion Conference, Friedrichshafen, Allemagne, 16-20 septembre, Ed. W. Possart, 2012.
  • [ACTI35] Shanahan M.E.R., Budzik M.K., Jumel J., Adhesion perturbation due to surface heterogeneity. Euradh '12, 9th European Adhesion Conference, Friedrichshafen, Allemagne, 16-20 septembre, Ed. W. Possart, 2012.
  • [ACTI36] Budzik M.K., Jumel J., Shanahan M.E.R., Viscoelasticity Effects in Adhesive Joints. Euradh '12, 9th European Adhesion Conference, Friedrichshafen, Allemagne, 16-20 septembre, Ed. W. Possart, 2012.
  • [ACTI37] Jumel J., Budzik M.K., Ben Salem N., Shanahan M.E.R., Instrumented Fracture Mechanic Tests. Euradh '12, 9th European Adhesion Conference, Friedrichshafen, Allemagne, 16-20 septembre, Ed. W. Possart, 2012.
  • [ACTI38] Maheo L., Viot P., Dynamic indentation on layered polypropylene foams. 10th International DYMAT Conference, Freiburg, Germany, September 2-7, Ed. EPJ Web Of Conferences, Vol. 26, pp. 04040, DOI dx.doi.org/10.1051/epjconf/20122604040, 2012.
  • [ACTI39] Ramakrishnan K.R., Viot P., Guerard S., A Comparative Study of the Impact Properties of Sandwich Materials with Different Cores. 10th International DYMAT Conference, Freiburg, Germany, September 2-7, Ed. EPJ Web Of Conferences, 2012.
  • [ACTI40] Ranc N., Palin-Luc T., Paris P.C., Saintier N., Under cyclic loading, plastic dissipation in heat at the crack tip modifies the stress intensity factor. International Conference on Crack Paths, Gaeta, Italy, September 19-21, Ed. Andrea Carpinteri, Francesco Lacoviello, Les P. Pook, Luca Susmel, Ed. Andrea Carpinteri, Francesco Lacoviello, Les P. Pook, Luca Susmel, pp. 13, ISBN/ISSN 9788895940441, 2012.
  • [ACTI41] Ben Abdessalem A., Azaïs R., Touzet-Cortina M., Guegout-Petit A., Puiggali M., Elegbede C., Modelling of fatigue crack propagation using Piecewise-Deterministic Markov Processes. 3rd International Conference on Engineering Optimization, Rio de Janeiro, Brazil, 1-5 July, Ed. ISBN 978-85-7650-344-6, pp. 469, 2012.
  • [ACTI42] Iordanoff I., Charles J.L., André D., Development of the GranOO discrete element platform for dynamic problems: Application for tribological application. International Joint Tribology Conference, Denver, CO, USA, October 7-10, Ed. ASME/STLE, pp. 325-329, DOI 10.1115/IJTC2012-61200, ISBN/ISSN 978-079184508-0, 2012.
  • [ACTI43] Le Goff E., Bois C., Wargnier H., Wahl J.C., Impact of material degradations on load transfer and assembly behavior. Application to reinforced holes in composite assembly. 15th European Conference on Composite Materials, Venice, Italy, June 24-28, 2012.
  • [ACTI44] Lozano D.E., Hinojosa Rivera M., Wahl J.C., Physical aspects and factors affecting surface quality in machined fiber reinforced polymer matrix composites. XXI International Materials Research Congress, Cancun, Mexico, August 12-17, 2012.
  • [ACTI45] Bois C., Wargnier H., Wahl J.C., Le Goff E., Design of hybrid (bonded/fastener) composite joints:from load transfer toward strength prediction. 15th European Conference on Composite Materials, Venice, Italy, June 24-28, 2012.
  • [ACTI46] Dau F., Dano M.L., Duplessis Kergomard Y., Investigation of damage mechanisms in 3D interlock textile composites under low velocity impact. 15th European Conference on Composite Materials, Venice, Italy, June 24-28, 2012.
  • [ACTI47] Ramakrishnan K.R., Shankar K., Viot P., Guerard S., An experimental and numerical study of the impact properties of sandwich plates with different cores. 7th Australian Congress on Applied Mechanics, Adelaide, Australia, December 9-12, 2012.
  • [ACTI48] Grimal Q., Grondin J., Guerard S., Barkmann R., Engelke K., Glüer C.C., Laugier P., Quantitative ultrasound to assess femur neck strength and cortical bone properties. European Society of Biomechanics, XVIIIth Congress, Lisbon, Portugal, July 1-4, Journal of Biomechanics, Vol. 45, pp. S543, Supplement 1, 2012.
  • [ACTI49] Haupert S., Guerard S., Mitton D., Peyrin F., Laugier P., Nonlinear ultrasound monitoring of single crack propagation in cortical bone. IEEE Ultrasonics Symposium, Dresden, Germany, October 7-10, 2012.
  • [ACTI50] Laporte S., Guerard S., Persohn S., Skalli W., Influence of the velocity on the in vitro fracture of the femoral neck for lateral compression tests. 37th Congress of the Société de Biomécanique, Besançon, France, October 16-19, Computer Methods in Biomechanics and Biomedical Engineering, Vol. 15, pp. 285-287, Supplément 1, 2012.
  • [ACTI51] Nikitin A., Shanyavskiy A., Palin-Luc T., Bathias C., Fatigue cracking in bifurcation area of titanium alloy at 20 kHz. International Conference on Crack Paths, Gaeta, Italy, September 19-21, Ed. Andrea Carpinteri, Francesco Lacoviello, Les P. Pook, Luca Susmel, pp. 8, 2012.
  • [ACTI52] Bidouard H., Saintier N., Palin-Luc T., Dumas C., Effect of overloads in high cycle fatigue on a ferritic-bainitic steel. 3rd Fatigue Symposium Leoben, Leoben, Austria, April 18-19, pp. 12, 2012.
  • [ACTI53] Pruliere E., Efficient reduced simulation of shell structures with a full description of the thickness. 11th ASME Engineering Systems Design and Analysis, Nantes, France, july 2-4, 2012.
  • [ACTI54] Jumel J., Budzik M.K., Ben Salem N., Shanahan M.E.R., Blanca P.L., Application of Backface Strain Monitoring Technique to Delamination Test. 15th European Conference on Composite Materials, Venice, Italy, June 24-28, 2012.
  • [ACTI55] Jumel J., Budzik M.K., Ben Salem N., Investigation of cohesive force distribution during delamination test with the backface strain monitoring technique. 15th European Conference on Composite Materials, Venice, Italy, June 24-28, 2012.
  • [ACTI56] Gras L.L., Laporte S., Mitton D., Crevier-Denoix N., Viot P., Tensile Tests on a Muscle: Influence of Experimental Conditions and of Velocity on its Passive Response. International Research Council on the Biomechanics of Injury, Dublin, Ireland, June 12-14, 2012.
  • [ACTI57] Maheo L., Viot P., Bernard D., Chirazi A., Ceglia G., Mondain-Monval O., Schmitt V., Elastic behavior of a polystyrene open-cell foam. International Conference on Mechanical Nano, Micro and Macro Composites Structure, Torino, Italy, June 18-20, 2012.
  • [ACTI58] Viot P., Denneulin S., Froustey C., Leonardi F., Lataillade J.L., Study of the damage to composite structures by low-velocity perforation- Application for a composite helmet. Russian-French Symposium on Composite Materials, Saint Petersburg, Russia, July 10-13, 2012.
  • [ACTI59] Viot P., Maheo L., Bernard D., Chirazi A., Ceglia G., Mondain-Monval O., Schmitt V., Study of the mechanical behaviour of multi-scale open-cell foams. Russian-French Symposium on Composite Materials, Saint Petersburg, Russia, July 10-13, 2012.
  • [ACTI60] Viot P., Maheo L., Bernard D., Chirazi A., Ceglia G., Mondain-Monval O., Schmitt V., Elastic behavior of a polystyrene open-cell foam. 10th International Conference on Foam Materials & Technology, Barcelona, Spain, September 12-13, 2012.
  • [ACTI61] Ceglia G., Mondain-Monval O., Schmitt V., Maheo L., Viot P., Chirazi A., Bernard D., Structure and properties of emulsion-based porous materials. 26th Conference of the European Colloid and Interface Society, Malmö, Suède, September 2-7, 2012.
  • [ACTI62] Marti N., Saintier N., Favier V., Grégori F., Ranc N., Frequency Impacts on Mechanisms of Microplasticity under Fatigue Loading – Case of Polycrystalline Pure Copper. 8th European Solid Mechanics Conference, Graz, University of Technology, Austria, July 9-13, 2012.
  • [ACTI63] Arif M.F., Meraghni F., Saintier N., Fitoussi J., Robert G., Experimental Fatigue Damage Evaluation of Short Glass Fiber Reinforced Polyamide Composites. 8th European Solid Mechanics Conference, Graz, University of Technology, Austria, July 9-13, 2012.
  • [ACTI64] Orejon D., Sefiane K., Shanahan M.E.R., DC Electrowetting Applied to TiO2-water Nanofluid Droplets. DC Electrowetting Applied to TiO2-water Nanofluid Droplets, Jeju, Corée, 26-31 mai, pp. 1-12, Conférence invitée, 2013.
  • [ACTI65] Shanahan M.E.R., Sefiane K., Moffat J.R., Orejon D., Koutsos V., Askounis A., Wetting & evaporation of sessile drops: some fundamental parameters. 1st International Workshop: Wetting and evaporation: droplets of pure and complex fluids, Marseille, France, 17-20 juin, pp. 20-21, Conférence invitée, 2013.
  • [ACTI66] Ben Salem N., Jumel J., Budzik M.K., Shanahan M.E.R., Combined Experimental and Theoretical Analysis of the Mixed Mode Bending Test. 30th International Conference on Multiaxial Fatigue & Fracture, Kyoto, Japon, 3-6 juin, 2013.
  • [ACTI67] André D., Charles J.L., Iordanoff I., A new C++ workbench to develop discrete element simulations: GranOO. 2nd ECCOMAS Young Investigators Conferences, Bordeaux, France, September 02-06, 2013.
  • [ACTI68] Jebahi M., André D., Charles J.L., Dau F., Iordanoff I., A multi-scale coupling method to simulate the silica glass behavior under high pressures. 2nd ECCOMAS Young Investigators Conferences, Bordeaux, France, September 02-06, 2013.
  • [ACTI69] Antoinat L., Kubler R., Achard G., Barou J.L., Viot P., Barrallier L., Low velocity perforation of an aluminum alloy: experiments and simulations. 13th International Conference on Fracture, Beijing, China, June 16–21, 2013.
  • [ACTI70] Pruliere E., Efficient reduced simulations of composite structures using the Proper Generalized Decomposition. 17th Intenational Conference on Composite Structure, Porto, Portugal, 17-21 juin 2013, 2013.
  • [ACTI71] Guillaud N., Froustey C., Dau F., Viot P., Influence of tensile preloading on impact behavior of thick composite plates. 17th Intenational Conference on Composite Structure, Porto, Portugal, 17-21 juin 2013, 2013.
  • [ACTI72] Matadi Boumbimba R., Viot P., Froustey C., Gerard P., Leonardi F., Effect of acrylate triblock copolymer on glass/ Epoxy composites toughness during low velocity impacts. 17 International Conférence on composite Structures, Porto, Portugal, 17-21 juin 2013, 2013.
  • [ACTI73] Jumel J., Budzik M.K., Guitard J., Possart W., Shanahan M.E.R., Experimental Investigation of Cohesive Strain Development during Constant Force Single Cantilever Beam Test. 10th Euradh', Alicante, Espagne, 22-25 avril, 2014.

Communications avec actes dans un congrès National

  • [ACTN1] André D., Iordanoff I., Charles J.L., Néauport J., Modèle par éléments discrets pour l’étude du comportement dynamique d’un matériau élastique. Méthodologie de quantification des paramètres microscopiques. . 10ème Colloque National en Calcul des Structures, Giens, France, 9-13 mai, 2011.
  • [ACTN2] Terreros I., Iordanoff I., Charles J.L., Simulation de la conduction de la chaleur dans un milieu continu par un modèle éléments discrets. 20ème Congrès Français de Mécanique, Besançon, France, 28 août-2 septembre, 2011.
  • [ACTN3] Dhondt M., Aubert I., Saintier N., Olive J.M., Corrosion sous contrainte intergranulaire du noyau de soudure par FSW de l'alliage Al-Li 2050. Journées jeunes chercheurs, Lyon, France, 11-12 juillet, 2011.
  • [ACTN4] Bois C., Colt M., Wargnier H., Wahl J.C., Etude du transfert de charge dans les assemblages composites hybrides boulonnés et collés. 17ème Journées Nationales sur les Composites, Poitiers, France, 15-17 juin, 2011.
  • [ACTN5] Pineau P., Dau F., Évaluation de la dispersion des propriétés mécaniques d’un matériau composite par sous-échantillonnage. 17ème Journées Nationales sur les Composites, Poitiers, France, 15-17 juin, 2011.
  • [ACTN6] Dau F., Duplessis Kergomard Y., Heimbs S., Choc mou basse énergie sur composite interlock 3X : approche expérimentale et numérique. 17ème Journées Nationales sur les Composites, Poitiers, France, 15-17 juin, 2011.
  • [ACTN7] Pattofatto S., Fortineau V., Guerard S., Laporte S., Mechanical response and failure processes of anterior ligament from static to dynamic loading rates. 36ème Congrès de la Société de Biomécanique, Besançon, France, 31 août- 2 septembre, 2011.
  • [ACTN8] Iordanoff I., André D., Charles J.L., Viot P., Méthode des éléments discrets : des problèmes multi-corps aux problèmes d’endommagement dynamique complexes. 10ème Colloque National en Calcul des Structures, Giens, France, 9-13 mai, 2011.
  • [ACTN9] Robert C., Saintier N., Palin-Luc T., Morel F., Étude numérique du comportement en fatigue à grand nombre de cycles d’agrégats polycristallins de cuivre. 20ème Congrès Français de Mécanique, Besançon, France, 28 août-2 septembre, 7 pages, 2011.
  • [ACTN10] Olive J.M., Mesures et calculs des Interaction Hydrogène-plasticité d'aciers. De la bande de glissement au polycrystal. Colloque Plasticité 2011, Lille, France, 4-6 avril, Conférence invitée, 2011.
  • [ACTN11] Faudemer G., Budzik M.K., Jumel J., Shanahan M.E.R., Caractérisation mécanique de colles dentaires. Mécamat, Aussois, France, 22-28 janvier, 2012.
  • [ACTN12] Pilato A., Perry N., Bois C., Wahl J.C., Démarche de conception d’un essai de caractérisation mécanique multi-instrumente : cas d'un test de mise sous pression d’anneau composite. 13ème Démarche et innovation dans la conception et la production des systèmes intégrés, Mont Dore, France, 27-30 mars, Ed. AIP Priméca, 2012.
  • [ACTN13] Arbaoui J.E., Malenfant J.C., Wahl J.C., Bois C., Étude expérimentale et modélisation de l’endommagement et de la perméabilité des matériaux composites destinés aux applications spatiales. ACMA 2012, Fés, Maroc, 09-12 mai, 2012.
  • [ACTN14] Devos O., Caractérisation électrochimique d'un matériau métallique passivé sous contrainte Mécanique. Atelier:Electrochimie & Corrosion du Groupe Electrochimie de la Société Chimique de France, Paris, France, 29 mars, Conférence invitée, 2012.
  • [ACTN15] Ahmadi-Senichault A., Vignoles G.L., Ayvazyan V., Caty O., Bresson G., Gregori M.L., Fonseca Costa S., Transferts thermiques 3D dans des composites silice – phénolique: méthodes thermographiques et tomographiques. Congrès Français de Thermique- Thermique en conditions extrêmes, Bordeaux, France, 29 mai - 1er juin, 2012.
  • [ACTN16] André D., Jebahi M., Iordanoff I., Charles J.L., Néauport J., Modélisation par éléments discrets de matériaux élastiques fragiles. Application à l’essai d’indentation sur verre de silice. 11ème Colloque National en Calcul des Structures, Giens, France, 13-17 Mai 2013, 2013.
  • [ACTN17] Charles J.L., André D., Iordanoff I., GranOO : plateforme de simulation DEM en dynamique explicite. 11ème Colloque National en Calcul des Structures, Giens, France, 13-17 Mai 2013, 2013.
  • [ACTN18] Jumel J., Characterization of bonded joint mechanical behavior with fracture mechanic tests. GDRE Meeting, Ultrasonic NDT of bonding, developments and links with mechanics and chemistry, Institut Langevin, Paris, France, Janury the 16th, 2013.
  • [ACTN19] Cherif M., Bois C., Landon Y., Rôle des défauts de perçage sur le comportement en matage des composites stratifiés sous sollicitation de fatigue. AMAC Journée Scientifique et Technique Assemblage des structures composites, Bordeaux, France, 18/11/2013, Ed. AFM, 2013.
  • [ACTN20] Guillaud N., Froustey C., Dau F., Viot P., Réponse à l’impact de plaques composites épaisses préchargées en tension uniaxiale. 21ème Congrès Français de Mécanique, Bordeaux, France, 26-30 août, 2013.
  • [ACTN21] Bresson G., Caty O., Merzeau J., Dau F., Ahmadi-Senichault A., Vignolles G., Essais d’impact et propriétés thermiques résiduelles sur composites silice/phénolique. 21ème Congrès Français de Mécanique, Bordeaux, France, 26-30 août, 2013.
  • [ACTN22] Dau F., Maheo L., 18ème Journées Nationales sur les Composites, Nantes, France, 12-14 Juin, Ed. RCMA, 2013.
  • [ACTN23] Matadi Boumbimba R., Viot P., Froustey C., Leonardi F., Gerard P., Inoubli R., Comportement à l’impact des composites fibres de verre/Epoxy modifié copolymère à bloc. 21ème Congrès Français de Mécanique, Bordeaux, France, 26-30 août, 21ème Congrès Français de Mécanique Bordeaux 26 au 30 août 2013, Conférence invitée, 2013.
  • [ACTN24] Guillaud N., Dau F., Froustey C., Viot P., Étude de l'influence de la pression interne sur le comportement à l'impact de tubes composites bobinés. Dynamique et acoustique de structures composites, Nevers, FRANCE, 9-10 Avril, Ed. ISAT, 2014.
  • [ACTN25] Huchon N., Froustey C., Charles J.L., Iordanoff I., Contribution à l’étude et à la modélisation du comportement mécanique de modules photovoltaïques soumis à des impacts. Dynamique et acoustique de structures composites, Nevers, FRANCE, 9-10 Avril, Ed. ISAT, 2014.

COMmunications sans actes dans un congrès national ou international

  • [COM1] Shanahan M.E.R., Radulovic J., Sefiane K., Some Aspects of Superspreading and their Possible Explanation. 85th CS Colloid & Surface Science Symposium, McGill, Montréal, Canada, 19-22 juin, Conférence invitée, 2011.
  • [COM2] Shanahan M.E.R., Jumel J., Budzik M.K., Effets de variabilité d’adhésion et de vieillissement en collage structural. 16ème Journées d’étude sur l’adhésion, Trégastel, France, 18-23 septembre, Conférence invitée, 2011.
  • [COM3] Shanahan M.E.R., Budzik M.K., Jumel J., Evaluation Non Destructive d'un joint de colle”. Journée de rencontre Chercheurs I2M - Industriels et Professionnels Français sur du thème Contrôle et Evaluation Non Destructifs, Bordeaux. Journée de rencontre Chercheurs I2M - Industriels et Professionnels Français sur du thème Contrôle et Evaluation Non Destructifs, Bordeaux, France, 8 juin, 2011.
  • [COM4] Olive J.M., Aubert I., Saintier N., Mesures et calculs des Interactions Hydrogène-plasticité d'aciers CFC. De la bande de glissement au polycrystal. Coloque Plasticité, Villeneuve D'Asq, France, 4-6 avril 2011, Conférence invitée, 2011.
  • [COM5] Devos O., Gabrielli C., Tribollet B., In situ investigation of scale deposit by coupling of electrochemical and optical measurements. Effect of mass transport. Cost F2 1st Conference, Florence, Italie, 7-9 novembre, 2011.
  • [COM6] Devos O., Sidane D., Puiggali M., Touzet-Cortina M., Tribollet B., Vivier V., Comportement électrochimique du film passif d’un acier inox 304L en présence d’une contrainte mécanique. Journées d'Electrochimie 2011, Grenoble, France, 4-8 juillet, 2011.
  • [COM7] Devos O., Cazaurang F., Duchamp G., Conception d'une maquette avionique pour l'étude du codage Gillham de l'altitude. 9e CETSIS 2011, Trois Rivières, Québec, 23-26 Octobre, 2011.
  • [COM8] Sidane D., Bousquet E., Devos O., Puiggali M., Touzet-Cortina M., Poulon-Quintin A., Tribollet B., Vivier V., Etude à l’échelle locale de la corrosion d’un alliage d’aluminium 2024. Journées d'Electrochimie 2011, Grenoble, France, 4-8 juillet, 2011.
  • [COM9] Mouanga M., Puiggali M., Pébère N., Vivier V., Tribollet B., Devos O., Étude par Impédance Électrochimique locale du couplage galvanique Zinc- Acier. 23ème Forum des Impédance Electrochimiques, Paris, France, 8 décembre, 2011.
  • [COM10] Mascaro B., Budzik M.K., Jumel J., Castaings M., Shanahan M.E.R., Monitoring of crosslinking of a DGEBA-PAMAM adhesive using mechanical and ultrasound techniques. 10th Anglo-French Physical Acoustics Conference, Fréjus, France, January 19-21, 2011.
  • [COM11] El May M., Saintier N., Palin-Luc T., Devos O., Corrosion-fatigue phenomena on a martensitic stainless steel. 4th Conference on Environmental Degradation of Engineering Materials and 5th Conference on Materials Engineering and Technologies, Gdansk, Pologne, 16-18 Mai, Conférence invitée, 2011.
  • [COM12] Shanahan M.E.R., Liquids of High Surface Tension on (Relatively) Soft Solids, or When the Solid Meets its Match. 7th International Conference on High temperature Capillarity, Eilat, Israel, 18-22 mars, 2012.
  • [COM13] Askounis A., Orejon D., Koutsos V., Sefiane K., Shanahan M.E.R., Pinned Volatile Droplets: Nanoparticle Deposits near the Contact Line. 5th International Workshop: Bubbles and Drop Interfaces, Cracovie, Pologne, 20-24 mai, 2012.
  • [COM14] Orejon D., Sefiane K., Shanahan M.E.R., Electrowetting Applied to Nanofluids, Suppressing Stick-Slip Behaviour. 5th International Workshop: Bubbles and Drop Interfaces, Cracovie, Pologne, 20-24 mai, 2012.
  • [COM15] Bresson G., Budzik M.K., Jumel J., Shanahan M.E.R., Confrontation entre techniques de contrôle destructives (CD) et non-destructives (CND). Journée d'information scientifique et technique : Evaluation non destructive des assemblages collés dans le domaine des transports, Bordeaux, France, 14 juin, 2012.
  • [COM16] El May M., Palin-Luc T., Saintier N., Devos O., How aqueous corrosion decreases the high cycle fatigue strength of a martensitic stainless steel. International Conference on Fatigue Damage of Structural Materials IX, Hyannis, Massachusetts, USA, September 16-21, 2012.
  • [COM17] Roche V., Córdoba-Torres P., Mesquita T.J., Devos O., Tribollet B., Nogueira R.P., Apparent potential-dependency CPE behavior caused by geometry-induced current and potential distributions. 63th Annual Meeting of International Society of Electrochemistry, Prague, République Tchèque, August 19-24, 2012.
  • [COM18] El May M., Palin-Luc T., Saintier N., Devos O., Effect of aqueous corrosion on the high cycle fatigue strength of a martensitic stainless steel. 19th European Conference on Fracture, Kazan, Russie, August 26-31, Ed. International Journal of Fatigue, Vol. 47, pp. 330-339, 2012.
  • [COM19] Nikitin A., Shanyavskiy A., Palin-Luc T., Bathias C., Fatigue behavior of the titanium alloy Ti-6Al-4Mo in bifurcation area at 20 kHz. 19th European Conference on Fracture, Kazan, Russie, August 26-31, pp. 8, 2012.
  • [COM20] Hor A., Saintier N., Robert C., Palin-Luc T., Morel F., Analysis of the mesoscopic high cycle fatigue strength of FCC metals with polycrystalline plasticity and extreme value probability methods. 19th European Conference on Fracture, Kazan, Russie, August 26-31, 8 pages, 2012.
  • [COM21] Guerchais R., Robert C., Morel F., Saintier N., Palin-Luc T., A new interpretation of the loading path effect in high cycle fatigue via numerical simulation of polycrystalline aggregates. 19th European Conference on Fracture, Kazan, Russie, August 26-31, 8 pages, 2012.
  • [COM22] Ranc N., Palin-Luc T., Paris P.C., Saintier N., The effect on the mode I stress intensity factor of plastic dissipation in heat at the crack tip under cyclic loading. 19th European Conference on Fracture, Kazan, Russie, August 26-31, 2012.
  • [COM23] Huchon N., Charles J.L., Matadi Boumbimba R., Iordanoff I., Froustey C., Contribution à l'étude et à la modélisation du comportement mécanique de modules photovoltaïques soumis à des impacts. 21ème Congrès Français de Mécanique, Bordeaux, France, 26-30 août, 2013.
  • [COM24] Goupil A., Iordanoff I., Charles J.L., Rinchet A., Modelling of polishing tools for high spatial frequency defect correction on aspherical surfaces. 16th ESAFORM Conference on Material Forming, Aveiro, Portugal, 22-24 avril 2013, Vol. 554-557, pp. 1232-1241, DOI 10.4028/www.scientific.net/KEM.554-557.1232, ISBN/ISSN 978-303785719-9, 2013.
  • [COM25] Pardoen T., Brugger C., Massart T., Interface controlled plastic flow modeled by strain gradient plasticity - application to fine grained steels and thin films. COMPLAS XII, Barcelona, Espagne, 03-05 septembre, 2013.
  • [COM26] Jordava F., Guitard J., Jumel J., Shanahan M.E.R., Colat-Parros J., Ageing of dental composites : 1-year mechanical properties follow-up. Congrès Européen d’Odontologie Conservatrice, Paris, France, May 9-11, 2013.
  • [COM27] Bonaccurso E., Shanahan M.E.R., Chen L., Inertial to Viscoelastic Transition in Early Drop Spreading on Soft Surfaces. 2013 Materials Research Society (MRS) Fall Meeting, Boston, USA, 1-6 décembre, Ed. MRS, 2013.
  • [COM28] Shanahan M.E.R., Chen L., Bonaccurso E., Early stages of drop spreading on soft viscoelastic solids. COST MPNS Action MP1106: Smart and green interfaces - from single bubbles and drops to industrial, environmental and biomedical applications, Workshop ''Wetting of solids : Material and kinetic aspects'', Cargèse, Corse, France, 13-14 Novembre, Conférence invitée, 2013.
  • [COM29] Steinchen A., Shanahan M.E.R., Sefiane K., About evaporation of nanofluid droplets with applied DC potential on hydrophobized substrates. COST MPNS Action MP1106: Smart and green interfaces - from single bubbles and drops to industrial, environmental and biomedical applications, Workshop ''Wetting of solids : Material and kinetic aspects'', Cargèse, Corse, France, 13-14 Novembre, 2013.
  • [COM30] Jumel J., Shanahan M.E.R., Budzik M.K., Ben Salem N., Bresson G., Investigation of Adhesive and Cohesive Behaviour of Bonded Joints with Fracture Mechanics Tests. GDRE Meeting, Ultrasonic NDT of bonding, developments and links with mechanics and chemistry, Institut Langevin, Paris, France, Janury the 16th, 2013.
  • [COM31] El May M., Saintier N., Palin-Luc T., Devos O., The effect of aqueous corrosion on the high cycle fatigue strength of an aeronautical martensitic stainless steel X12CrNiMoV12-3. 5th Fatigue design 2013, Senlis, France, 27-28 Novembre, 2013.
  • [COM32] Jumel J., Etude la rupture différée dans les liaisons collées. Colloque ACCESS, Assemblage par Collage COmposites et ELastomères, Le Bouchet, France, 07 NOvembre, 2013.

Ouvrages Scientifiques

  • [OS1] Radulovic J., Sefiane K., Starov V.M., Ivanova N., Shanahan M.E.R., Review on Kinetics of Spreading and Wetting by Aqueous Surfactant Solutions (Chap.2, pp. 37-69), in Drops and Bubbles in Contact with Solid Surfaces. Eds. M. Ferrari, L. Liggieri, R. Miller. Ed. Koninklijke Brill NV, Leiden (NL), pp. 37-69, 2012.
  • [OS2] Askounis A., Sefiane K., Koutsos V., Shanahan M.E.R., Effect of particle geometry on triple line motion of nano-fluid droplets and deposit nano-structuring. Advances Colloid Interface Sci., in press. Advances Colloid Interfece Sci, 2014.

Chapitres d'Ouvrages Scientifiques

  • [COS1] Podlipenets A.N., “Thermodynamics of Adhesion”. “Handbook of Adhesion Technology”, Ch. 5, (R.D. Adams, A. Öechsner, Lucas F M da Silva, Eds), Springer-Verlag (Berlin), pp.105-116 (2011). Ed. Springer-Verlag, pp. 105-116, 2011.
  • [COS2] Possart W., Shanahan M.E.R., “Thermodynamics of Adhesion”. “Handbook of Adhesion Technology”, Ch. 5, (R.D. Adams, A. Öechsner, Lucas F M da Silva, Eds). Ed. Springer-Verlag (Berlin), pp. 105-116, 2011.
  • [COS3] Shanahan M.E.R., Possart W., ''Handbook of Adhesion Technology”, Ch. 3, (R.D. Adams, A. Öechsner, Lucas F M da Silva, Eds). Ed. Springer-Verlag (Berlin), pp. 65-91, 2011.
  • [COS4] Viot P., Ballere L., Lataillade J.L., On the Prediction of the Residual Behavior of Impacted Composite curved Panels (Chap.1), in Nanocomposites with unique properties and applications in medicine and industry. pp. 3-20, ISBN/ISSN 978-953-307-351-4, 2011.

Autres Productions

  • [AP1] Jumel J., Budzik M.K., Ben Salem N., Shanahan M.E.R., Blance P.L., Application of Backface Strain Monitoring Technique to Delamination Test. 2012.
  • [AP2] Ben Salem N., Jumel J., Budzik M.K., Shanahan M.E.R., Reconstruction des évolutions contraintes/déformations de cisaillement et pelage à partir de mesure de déformation de peau lors d’un essai de fissuration en mode mixte. Journées Scientifiques et Techniques AMAC-MECAMAT, Bordeaux, France, 18 novembre, 2013.
  • [AP3] Shanahan M.E.R., Budzik M.K., Jumel J., Effets non-additifs dans l’adhésion mixte, Séminaire du SIMM Science et Ingénierie de la matière molle. Séminaire du SIMM Science et Ingénierie de la matière molle – Physico-Chimie des polymères et des milieux dispersés, ENSPCI, Paris, France, 7 mars, 2014.
  • [AP4] Jumel J., Ben Salem N., Budzik M.K., Shanahan M.E.R., Reconstruction des évolutions contraintes/déformations de cisaillement et pelage à partir de mesure de déformation de peau lors d’un essai de fissuration en mode mixte. Réunion Groupe de travail MACS : « Maîtrise des Assemblages Collés Structuraux », 3 février 2014, ENSAM - Paris, 2014.
  • [AP5] Shanahan M.E.R., Sefiane K., Moffat J.R., Orejon D., Koutsos V., Askounis A., Mouillage et Evaporation Simultanés des Liquides. Séminaire du SIMM Science et Ingénierie de la matière molle – Physico-Chimie des polymères et des milieux dispersés, ENSPCI, Paris, France, 7 mars, 2014.
  • [AP6] Shanahan M.E.R., Jumel J., Budzik M.K., Ben Salem N., Bresson G., Chauffaille S., Faudemer G., Assemblage par collage : quelques aspects physiques et mécaniques. Séminaire au CERMEL, Université François Rabelais, Tours, 23 mai 2014, 2014.
  • [AP7] Shanahan M.E.R., Jumel J., Budzik M.K., Ben Salem N., Bresson G., Chauffaille S., Faudemer G., Adhesive bonding: some physical and mechanical aspects, séminaire University of Edinburgh, Ecosse, 24 juin 2014. 2014.

Brevets

  • [BRVT1] Viot P., Baudou J., BREVET - Casque comprenant une coque de protection à rigidité variable. Date de publication 2011-03-11, Demandeurs : ARTS [FR] - THALES SA [FR], Classification internationale : A42B3/04 ; G02B27/01, N° Demande : FR20090004270 20090908, N° se priorité : FR20090004270 20090908. 2011.

Rapports de Recherche

  • [RAPR1] Brugger C., Palin-Luc T., Bathias C., Réalisation et mise au point d'un dispositif d'essai de fatigue ultrasonore biaxial à R>0. 2012.
  • [RAPR2] Jordava F., Guitard J., Jumel J., Shanahan M.E.R., Colat-Parros J., Ageing of dental composites: 1-year mechanical properties follow-up. Ageing of dental composites: 1-year mechanical properties follow-up, Paris, France, 9-11 mai, 2013.
  • [RAPR3] Barou J.L., Pruliere E., Le Quiniou A., Rapport d'expertise (confidentiel industrie) dans le cadre du projet Région Aquitaine REBECAA, 2009-2013 avec AIRBUS/SNECMA/HERAKLES/SAFRAN. 2013.